Application Notes
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
SLIC-Device-Applications-Appnote | 704.63 kB | 02/15/2013 | 02/15/2013 | |
SLIC-Dial-Pulse-Performance-Appnote | 423.94 kB | 02/15/2013 | 02/15/2013 | |
SLIC-Longitudinal-Balance-Appnote | 429.35 kB | 02/15/2013 | 02/15/2013 | |
Telephone-Line-Card-Power-Considerations-Appnote | 380.88 kB | 02/15/2013 | 02/15/2013 | |
The Basics of Synchronized Ethernet-SyncE
With Ethernet having become the dominant technology for data transmission, Synchronous Ethernet (SyncE) is now used to synchronize networks in the physical layer in a fashion similar to SONET/SDH or T1/E1. Originally published in EETimes Asia in 2009, Microsemi applications engineer Slobodan Milijevic describes the basics of SyncE and how telecom providers can confidently implement networks based on SyncE as a cost-effective and reliable solution.
|
255.22 kB | 02/15/2013 | 02/15/2013 | |
Time and Frequency Synchronization in Broadcast Video | 336.38 kB | 10/06/2014 | 10/15/2014 | |
Time Interfaces
Presented at the International Telecom Sync Forum (ITSF) conference in 2011, this paper describes the need for time synchronization in the network, challenges of the time interface and the various interfaces and requirements for time and phase.
|
401.38 kB | 02/14/2013 | 02/14/2013 | |
Timing OTN Overview
Describes the current market trends, an overview of the optical transport network (OTN), architecture and synchronization requirements, Microsemi’s OTN offering and application examples.
|
934.85 kB | 02/14/2013 | 02/14/2013 | |
Trends in Time & Phase Synchronization
Presented at the Workshop on Synchronization in Telecommunication Systems (WSTS) in 2012, this paper provides insight into the drivers for synchronization in the network, the ongoing migration from traditional to packet based networks and how evolving core, edge, and wireless networks drive the need for frequency and phase synchronization.
|
1.34 MB | 02/14/2013 | 02/14/2013 | |
Type-2-Calling-Identity-Appnote | 240.53 kB | 02/15/2013 | 02/15/2013 | |
Use an off-the-shelf signal source as a jitter/wander generator
Ensuring that routers, gateways or DSLAMs meet stringent timing specifications usually requires a specialized jitter/wander generator. Originally published in Design Idea/EDN, Microsemi applications engineer Slobodan Milijevic describes how to use a standard function generator to more cost-effectively and efficiently measure jitter and wander tolerance.
|
147.13 kB | 02/15/2013 | 02/16/2013 | |
Use of Combined Synchronous Ethernet & IEEE-1588 in Wireless TDD applications
As wireless networks become increasingly overloaded and migrate to IP based backhaul, IEEE-1588 in combination with SyncE provides not only compatibility to SONET/SDH but superior performance.
|
1.65 MB | 02/14/2013 | 02/14/2013 | |
White Paper: PCI Express Refclk Jitter Compliance | 1.49 MB | 09/25/2015 | 09/25/2015 | |
White Paper: Spread Spectrum Clocking | 299.23 kB | 09/16/2015 | 09/16/2015 | |
ZL3025x Whitepaper: Versatile, Easy-to-Use Solutions for a Wide Variety of Timing Challenges ZL3025x Whitepaper: Versatile, Easy-to-Use Solutions for a Wide Variety of Timing Challenges |
456.53 kB | 09/26/2014 | 11/20/2014 | |
ZLAN 327 Application Note | 196.31 kB | 03/22/2013 | 03/22/2013 | |
ZLAN 447 Application Note | 234.28 kB | 03/22/2013 | 03/22/2013 | |
ZLAN 68 AppNote Oct2012 | 165.93 kB | 02/15/2013 | 02/15/2013 | |
Zlan-178 Application Note nov07 | 91.34 kB | 02/15/2013 | 02/15/2013 | |
Zlan-199-appnote | 170.93 kB | 02/15/2013 | 02/15/2013 |