Datasheets
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
BR246-S0235 Datasheet | 109.24 kB | 07/02/2015 | 07/02/2015 | |
lx8117 Datasheet | 814.77 kB | 07/07/2015 | 07/07/2015 | |
SG1525A/SG1527A Datasheet
The SG1525A/1527A series of pulse width modulator integrated circuits are designed to offer improved performance and lower external parts count when used to implement all types of switching power supplies. The on-chip +5.1 volt reference is trimmed to ±1% initial accuracy and the input common-mode range of the error amplifier includes the reference voltage, eliminating external potentiometers and divider resistors. A Sync input to the oscillator allows multiple units to be slaved together, or a single unit to be synchronized to an external system clock. A single resistor between the Cresistor between the CT pin and the Discharge pin provides a wide range of deadtime adjustment. These devices also feature built-in soft-start circuitry with only a timing capacitor required externally. A Shutdown pin controls both the soft-start circuitry and the output stages, providing instantaneous turn-off with soft-start recycle for slow turn-on. These functions are also controlled by an undervoltage lockout which keeps the outputs off and the soft-start capacitor discharged for input voltages less than that required for normal operation. Another unique feature of these PWM circuits is a latch following the comparator. Once a PWM pulse has been terminated for any reason, the outputs will remain off for the duration of the period. The latch is reset with each clock pulse. The output stages are totem-pole designs capable of sourcing or sinking in excess of 200mA. The SG1525A output stage features NOR logic, giving a LOW output for an OFF state. The SG1527A utilizes OR logic which results in a HIGH output level when OFF.
Features • 8V to 35V operation • 5.1V reference trimmed to ±1% • 100Hz to 500KHz oscillator range • Separate oscillator sync terminal • Adjustable deadtime control • Internal soft-start • Input undervoltage lockout • Latching P.W.M. to prevent multiple pulses • Dual source/sink output drivers |
620.75 kB | 07/10/2015 | 07/10/2015 | |
SG1626/SG2626/SG3626 Datasheet
Key Features: • Pin for pin compatible with DS0026, TSC426 and ICL7667. • Totem pole outputs with 3.0A peak current capability. • Supply voltage to 22V. • Rise and fall times less than 25ns. • Propagation delays less than 20ns. • Inverting high-speed high-voltage Schottky logic. • Efficient operation at high frequency. • Available in: 8 Pin Plastic and Ceramic DIP 14 Pin Ceramic DIP 16 Pin Plastic S.O.I.C. 20 Pin LCC TO-99 TO-66 The SG1626, 2626, 3626 is a dual inverting monolithic high speed driver that is pin for pin compatible with the DS0026, TSC426 and ICL7667. This device utilizes high voltage Schottky logic to convert TTL signals to high speed outputs up to 18V. The totem pole outputs have 3A peak current capability, which enables them to drive 1000pF loads in typically less than 25ns. These speeds make it ideal for driving power MOSFETs and other large capacitive loads requiring high speed switching. In addition to the standard packages, Silicon General offers the 16 pin S.O.I.C. (DW-package) for commercial and industrial applications, and the Hermetic TO-66 (R-package) for military use. These packages offer improved thermal performance for applications requiring high frequencies and/or high peak currents.
|
531.03 kB | 07/10/2015 | 07/10/2015 | |
SG723 Datasheet
Key Features: • Positive or negative supply operation • Series, shunt, switching or floating operation • Low line and load regulation • Output adjustable from 2V to 37V • Output current to 150 mA • Low standby current drain • 0.002%/°C average temperature variation This monolithic voltage regulator is designed for use with either positive or negative supplies as a series, shunt, switching, or floating regulator with currents up to 150mA. Higher current requirements may be accommodated through the use of external NPN or PNP power transistors. This device consists of a temperature compensated reference amplifier, error amplifier, power series pass transistor, current limit, and remote shutdown circuitry. The SG723 will operate over the full military ambient temperature range of -55°C to 125°C.
|
315.78 kB | 07/10/2015 | 07/10/2015 | |
L0618-50-T523 Datasheet | 527.1 kB | 07/23/2015 | 07/23/2015 | |
GC4921-112/GC4922-112 Mesa Beam Lead Diodes Datasheet Mesa Beam Lead PIN Diode |
178.68 kB | 07/27/2015 | 09/10/2015 | |
LX3301A Smart Inductive Sensor Interface ICs Datasheet | Unknown | 07/29/2015 | 11/29/2018 | |
LX8237 Datasheet | 946.36 kB | 07/30/2015 | 07/30/2015 | |
MSC2931P3540 Datasheet | 370.85 kB | 07/31/2015 | 07/31/2015 | |
LX8204 Datasheet | 284.49 kB | 08/03/2015 | 08/03/2015 | |
LX7710 Datasheet | 455.24 kB | 08/24/2015 | 08/24/2015 | |
APTGT300TL65G Datasheet | 554.61 kB | 09/03/2015 | 09/03/2015 | |
APTGT400TL65G Datasheet | 557.25 kB | 09/03/2015 | 09/03/2015 | |
SA50-28-5-15T Datasheet | 1.19 MB | 09/04/2015 | 09/04/2015 | |
SA50-120 Single Datasheet | 1.54 MB | 09/04/2015 | 09/04/2015 | |
SA50-120 Triple Datasheet | 2.61 MB | 09/04/2015 | 09/04/2015 | |
MPL4700 Series PIN MMSM Limiter Diode Datasheet | 504.68 kB | 09/10/2015 | 09/10/2015 | |
MPS2R10-606 Datasheet | 659.36 kB | 09/17/2015 | 02/19/2016 | |
MUPT5e3 ‰ÛÒ MUPT48e3 Datasheet | 447.42 kB | 09/18/2015 | 06/01/2017 |