Hardware User’s Guides
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
RT PolarFire FPGA Board Design User Guide
RT PolarFire FPGA Board Design User Guide.
|
916.72 kB | 12/20/2021 | 12/20/2021 | |
VectorBlox™ Video Kit Demo Guide V1.2 | 989.97 kB | 09/27/2021 | 09/27/2021 | |
ChipPro FPGA Device Programmer Quick Start Guide | 184.43 kB | 06/02/2021 | 06/02/2021 | |
Silicon Sculptor 4 Quick Start Guide
Silicon Sculptor 4 Quick Start Guide
|
977.07 kB | 06/03/2020 | 06/03/2020 | |
FlashPro Express v12.3 User Guide
FlashPro Express v12.3 User Guide
|
1.24 MB | 03/23/2020 | 04/06/2020 | |
FlashPro Express v12.3 User Guide
FlashPro Express v12.3 User Guide
|
1.24 MB | 03/23/2020 | 04/06/2020 | |
FlashPro6 Statement of Volatility (SoV)
FlashPro6 Statement of Volatility (SoV)
|
110.56 kB | 03/23/2020 | 03/23/2020 | |
Hello FPGA LCD Board Schematics
Hello FPGA LCD Board Schematics
|
71.09 kB | 01/02/2020 | 01/02/2020 | |
Hello FPGA Camera Board Schematics
Hello FPGA Camera Board Schematics
|
95.3 kB | 01/02/2020 | 01/02/2020 | |
Hello FPGA Kit Schematics
Hello FPGA Kit Schematics
|
1.79 MB | 01/02/2020 | 01/02/2020 | |
UG0903: Pin-Outs of Hello FPGA Expansion Connectors User Guide
UG0903: Pin-Outs of Hello FPGA Expansion Connectors User Guide
|
1.07 MB | 01/02/2020 | 01/02/2020 | |
HiFive Unleashed Platform User Guide
User guide for PolarFire SoC pre-silicon development platform
|
12.1 MB | 10/07/2019 | 10/07/2019 | |
UG0872: PolarFire MPF300T FPGA Video Kit User Guide | 3.1 MB | 06/13/2019 | 03/29/2020 | |
UG0856: PolarFire FPGA Video Kit User Guide | Empty | 02/19/2019 | 04/07/2022 | |
CG484 Pin List for RT3P D/S | 82.45 kB | 08/22/2018 | 08/22/2018 | |
HiFive Unleashed Expansion Kit Quick Start Guide | 953.15 kB | 05/04/2018 | 05/04/2018 | |
HiFive Unleashed Getting Started Guide | 1.84 MB | 04/09/2018 | 04/09/2018 | |
Digi-Key SmartFusion2 Maker Board Quick Start Guide
Digikey/Digi-Key’s Maker Board provides designers with a low-cost evaluation board to access the SmartFusion2 system-on-chip (SoC) FPGA. This device integrates a 12K LE flash-based FPGA fabric, a 166 MHz ARM Cortex-M3 processor, DSP blocks, SRAM, eNVM, and general purpose GPIO interfaces all on a single chip. The Digi-Key SmartFusion2 Maker Board (M2S010-MKR-KIT) supports a USB port for JTAG programming, UART communications, and powering the board. The board also features an SPI flash, a 50 MHz clock source, 8 user LEDS, 2 user pushbuttons, a light sensor, and the VSC8541 PHY for 100 Mbps/1 Gbps Ethernet. There are also two unpopulated laid out connections—these pinouts support an ESP8266 and an ESP32 Wi-Fi/Bluetooth module (not included). The pinout is set up for programming and communication to the SmartFusion2 SoC FPGA. The board can be used with Microsemi’s Libero SoC v11.8 software or more recent versions of it. SoftConsole, an IDE for C/C++ programming of the ARM Cortex-M3 is available. The kit is powered through an LX7167A power module and includes integrated FlashPro5 programming hardware.
Software and Licensing Libero® SoC Design Suite offers high productivity with its comprehensive, easy-to-learn, easyto- adopt development tools for designing with Microsemi’s low power Flash FPGAs and SoC. The suite integrates industry standard Synopsys Synplify Pro® synthesis and Mentor Graphics ModelSim® simulation with best-in-class constraints management and debug capabilities. Download the latest Libero SoC release www.microsemi.com/products/fpga-soc/design-resources/design-software/liberosoc# downloads Generate a Libero SoC Silver license for your board www.microsemi.com/products/fpga-soc/design-resources/licensing Download the SoftConsole IDE installation files for Linux and Windows at www.microsemi.com/products/fpga-soc/design-resources/design-software/ softconsole#downloads Documentation Resources For more step by step instructions about the Digi-Key Maker board, including user’s guides, tutorials, and design examples, see the documentation at www.digikey.com/smartfusion2-makerboard Included Demo Design When the Digikey SmartFusion2 Maker Board is powered on, all 8 LEDs will flash on and off repeatedly. Once user button 1 is pressed, the ambient light sensor will be continuously read. The result of the light sensor reading will be shown visually across the 8 LEDs as a bar graph. |
860.1 kB | 12/12/2017 | 04/03/2018 | |
PolarFire Splash Kit QuickStart Card | 3.31 MB | 11/27/2017 | 01/11/2021 | |
UG0786: PolarFire FPGA Splash Kit User Guide | 8.37 MB | 11/09/2017 | 06/16/2021 |