Datasheets

FEATURES: • 8.5 VOLT NOMINALZENER VOLTAGE + 5% • TEMPERATURE COMPENSATED ZENER REFERENCE DIODES • LOW CURRENT RANGE: 0.5 AND 1.0 mA • METALLURGICALLY BONDED • DOUBLE PLUG CONSTRUCTION

The popular 1N4728AP thru 1N4764AP series of 1.0 watt Zeners provides voltage regulation in a selection from 3.3 to 100 volts in 5% tolerances with other tighter tolerances also available as identified by different suffix letters in the part number. These plastic encapsulated Zeners are moisture classified as Level 1 with no dry pack required. They are also available in various military screening levels by adding a prefix identifier as described in the Features below. These plastic molded Zeners with a P suffix provide a lower thermal resistance compared to the glass-body (G suffix) option for these same JEDEC part numbers. Both package options are available by Microsemi in RoHS Compliant devices with an “e3” suffix. Microsemi also offers numerous other Zener products to meet higher and lower power and test current applications.

FEATURES: • 1N4614UR-1 THRU 1N4627UR-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/435 • LEADLESS PACKAGE FOR SURFACE MOUNT • LOW CURRENT OPERATION AT 250 µA • METALLURGICALLY BONDED

FEATURES: • 1N4565A-1 THRU 1N4584A-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/452 • 6.4 VOLT NOMINALZENER VOLTAGE + 5% • TEMPERATURE COMPENSATED ZENER REFERENCE DIODES • METALLURGICALLY BONDED