Datasheets
Documents
| Document Name | Size | Published | Modified | |
|---|---|---|---|---|
|
|
SG6100 Datasheet | 472.03 kB | 11/30/-1 | 11/30/-1 |
|
|
SG7800 Datasheet
Key Features:
· Output voltage set internally to ± 1.5% on SG7800A
· Input voltage range to 50V max. on SG7800A
· Two volt input-output differential
· Excellent line and load regulation
· Foldback current limiting
· Thermal overload protection
· Voltages available: 5V, 12V, 15V
· Available in surface mount package
The SG7800A/SG7800 series of positive regulators offer self contained, fixed-voltage capability with up to 1.5A of load current and input voltage up to 50V (SG7800A series only). These units feature a unique on-chip trimming system to set the output voltages to within 1.5% of nominal on the SG7800A series, 2.0% on the SG7800 series. The SG7800A versions also offer much improved line and load regulation characteristics. Utilizing an improved Bandgap reference design, problems have been eliminated that are normally associated with the Zener diode references, such as drift in output voltage and large changes in the line and load regulation.
All protective features of thermal shutdown, current limiting, and safe-area control have been designed into these units and since these regulators require only a small output capacitor for satisfactory performance, ease of application is assured.
Although designed as fixed-voltage regulators, the output voltage can be increased through the use of a simple voltage divider. The low quiescent drain current of the device insures good regulation when this method is used.
Product is available in hermetically sealed TO-257, TO-3, TO39 and LCC packages.
|
767.55 kB | 11/30/-1 | 11/30/-1 |
|
|
SG7900 Datasheet
Key Features:
• Output voltage set internally to ±1.5% on SG7900A
• Output current to 1.5A
• Excellent line and load regulation
• Foldback current limiting
• Thermal overload protection
• Voltages available: -5V, -12V, -15V
• Contact factory for other voltage options
• Available in surface mount package
The SG7900A/SG7900 series of negative regulators offer self-contained, fixed-voltage capability with up to 1.5A of load current. With a variety of output voltages and four package options this regulator series is an optimum complement to the SG7800A/SG7800, SG140 line of three terminal regulators.
These units feature a unique band gap reference which allows the SG7900A series to be specified with an output voltage tolerance of ±1.5%. The SG7900A versions also offer much improved line regulation characteristics.
All protective features of thermal shutdown, current limiting, and safe-area control have been designed into these units and since these regulators require only a single output capacitor (SG7900 series) or a capacitor and 5mA minimum load (SG120 series) for satisfactory performance, ease of application is assured.
Although designed as fixed-voltage regulators, the output voltage can be increased through the use of a simple voltage divider. The low quiescent drain current of the device insures good regulation when this method is used, especially for the SG120 series.
These devices are available in hermetically sealed TO-257, TO-3, TO-39 and LCC package.
|
1.7 MB | 11/30/-1 | 11/30/-1 |
|
|
SGE2641-1 Datasheet
Transformer. Please see datasheet for specifications
|
83.01 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2641-1G Datasheet
Please See Datasheet for Details.
|
189.11 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2641-3 Datasheet
SGE2641-3 high voltage transformer
for CCFL inverter power supply. This component should be designed and manufactured in accordance with Engineering
Specification LES3811T
|
164.12 kB | 11/30/-1 | 11/30/-1 |
|
|
sge2641-3g Datasheet
Please see datasheet for details.
|
178.14 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2642-1 Datasheet
SGE2642-1 high voltage transformer for
CCFL inverter power supply. This component should be designed and manufactured in accordance with Engineering
Specification LES3811T
|
167.83 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2642-1G Datasheet
Please see datasheet for details.
|
189.89 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2643-3 Datasheet
See data sheet for details.
|
54.46 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2643-3 Datasheet
SGE2643-3 high voltage transformer
for CCFL inverter power supply. This component should be designed and manufactured in accordance with Engineering
Specification LES3811T
|
166.08 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2643-3G Datasheet
Please see datasheet for details.
|
171.28 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2644-1 Datasheet
See data sheet for details.
|
68.57 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2644-1G Datasheet
Please see datasheet for details.
|
189.13 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2644-3 Datasheet
SGE2644-3 high voltage transformer
for CCFL inverter power supply. This component should be designed and manufactured in accordance with Engineering
Specification LES3811T
|
163.36 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2644-3G Datasheet
Please see datasheet for details.
|
171.55 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2645-1 Datasheet
SGE2645-1 high voltage transformer
for CCFL inverter power supply. This component should be designed and manufactured in accordance with Engineering
Specification LES3811T
|
180.25 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2645-1G Datasheet
Please see datasheet for details.
|
189.47 kB | 11/30/-1 | 11/30/-1 |
|
|
sge2648-1 Datasheet
SGE2648-1 high voltage transformer
for CCFL inverter power supply. This component should be designed and manufactured in accordance with Engineering
Specification LES3811T
|
84.11 kB | 11/30/-1 | 11/30/-1 |
|
|
SGE2649-2 Datasheet
See data sheet for details.
|
242.03 kB | 11/30/-1 | 11/30/-1 |
