Datasheets
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
UMX9501FMR Datasheet With high isolation, low loss, and low distortion characteristics, this Microsemi packaged PIN diode is suited for antenna switch applications where size and power handling capability are critical. The assembly is designed for MRI applications where low susceptance is necessary. The surface mount package is ideal for high volume automated assembly applications. |
253.58 kB | 09/29/2015 | 10/02/2015 | |
SMAJ TVS Family Datasheet | 484.91 kB | 10/01/2015 | 10/01/2015 | |
SM16LC TVS Family Datasheet | 111.25 kB | 10/02/2015 | 10/02/2015 | |
1N8149-1N8182 Low-Cap TVS 150W Family Datasheet
This series of voidless-hermetically-sealed unidirectional low-capacitance Transient Voltage Suppressor (TVS) designs are ideal for protecting higher frequency applications in high-reliability applications where a failure cannot be tolerated. They include a unique rectifier diode in series and opposite direction from the TVS to achieve a very low capacitance of 4 pF. This product series provides a working peak “standoff” voltage selection from 6.8 to 170 volts with 150 watt ratings. They are very robust in hard-glass construction and also use an internal metallurgical bond identified as Category 1 for high reliability applications. These devices are also available in axial leaded packages for thru-hole mounting.
|
416.01 kB | 10/06/2015 | 10/06/2015 | |
1N8149US-1N8182US SQ-MELF Package Low-Cap TVS 150W Family Datasheet us
This series of voidless-hermetically-sealed unidirectional low-capacitance Transient Voltage Suppressor (TVS) designs are ideal for protecting higher frequency applications in high-reliability applications where a failure cannot be tolerated. They include a unique rectifier diode in series and opposite direction from the TVS to achieve a very low capacitance of 4 pF. This product series provides a working peak “standoff” voltage selection from 6.8 to 170 volts with 150 watt ratings. They are very robust in hard-glass construction and also use an internal metallurgical bond identified as Category 1 for high reliability applications. These devices are also available in axial leaded packages for thru-hole mounting.
|
422.24 kB | 10/06/2015 | 10/06/2015 | |
LX3302 Datasheet | Unknown | 12/18/2015 | 02/14/2018 | |
MPS4103-607 Datasheet | 585.2 kB | 03/22/2016 | 03/28/2016 | |
UMX502-UMX812 Datasheet s | 212.65 kB | 03/31/2016 | 04/08/2016 | |
ARF469AG, ARF469BG Datasheet | 1.4 MB | 04/11/2016 | 04/11/2016 | |
1416GN-120E, 1416GN-120-EL, 1416GN-120-EP Datasheet | 380.2 kB | 05/20/2016 | 04/20/2017 | |
APTGTQ50TA65T3G Datasheet | 507.06 kB | 05/23/2016 | 01/11/2017 | |
APTGTQ100DA65T1G Datasheet | 430.32 kB | 05/23/2016 | 01/11/2017 | |
APTGTQ100DDA65T3G Datasheet | 514.29 kB | 05/23/2016 | 01/11/2017 | |
APTGTQ100H65T3G Datasheet | 515.73 kB | 05/23/2016 | 01/11/2017 | |
APTGTQ100SK65T1G Datasheet | 431.37 kB | 05/23/2016 | 01/11/2017 | |
APTGTQ150TA65TPG Datasheet | 527.85 kB | 05/23/2016 | 01/11/2017 | |
APTGTQ200A65T3G Datasheet | 512.49 kB | 05/23/2016 | 01/11/2017 | |
APTGTQ200DA65T3G Datasheet | 531.12 kB | 05/23/2016 | 01/11/2017 | |
APTGTQ200SK65T3G Datasheet | 528.32 kB | 05/23/2016 | 01/11/2017 | |
PD-LPM-0205 Datasheet
The PD-LPM-0205 is a 12 Watt DC/DC converter module designed especially for remote power feeding applications. The module may be located at the feeding side (LTU) and operates from 40 to 60Vdc input voltage. It provides an isolated balanced output of ±60 to ±100Vdc/60 to 100mA. The module is designed to support peak output power of up to 14W at 30% duty cycle and maximum 3 seconds in duration. The output may be configured as a balanced, negative or positive supply rail in reference to earth ground. Output voltage and current limits may be adjusted in the specified range by adding an external resistor. A high precision current limiting circuit is implemented on the output. This feature enables delivery of maximum allowed current through the line, while maintaining the TNV safety requirements. The module also provides unique reporting signals, which are required for DSL terminals, indicating output line current leakage to earth ground, and Overload and No-Load conditions. For simple identification of the faulty wire, different indications are given for positive or negative leakage. The unit is protected against input under/over voltage, output overload and shorted output for an unlimited period. The PD-LPM-0205 is designed to work optimally while working in conjunction with the PowerDsine PD-NPM-03xx module series in the remote subsystem. Optimized design for HDSL voice pair gain system requirements simplify integration and reduce overall system cost and time to market.
|
84.37 kB | 06/21/2016 | 06/21/2016 |