Datasheets
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
MXP1144 Datasheet
Large area diode chip for medium current photovoltaic by-pass applications, or for higher current hybrid applications. The device is rated for 1A for applications where the device will be exposed to substantial radiation flux (space). For other applications, it may be operated at higher currents. A version with attached leads is available.
FEATURES:
• Oxide passivated structure for very low leakage currents
• Epitaxial structure minimizes forward voltage drop
• Triangular shape to fit in corner near flat of photovoltaic cell
• Forward voltage decreases with radiation exposure
• Targeted for terrestrial applications with silicon photovoltaic cells
• Thin construction for fit with photovoltaic cells
APPLICATIONS/BENEFITS:
• Increases efficiency of photovoltaic arrays
• Protects photovoltaic cells from reverse voltage
|
174.83 kB | 11/30/-1 | 11/30/-1 | |
MXP1144P Datasheet
Large area diode chip for medium current photovoltaic by-pass applications, or for higher current hybrid applications. The device is rated for 1A for applications where the device will be exposed to substantial radiation flux (space). For other applications, it may be operated at higher currents. A version with attached leads is available.
|
77.93 kB | 11/30/-1 | 11/30/-1 | |
MXP2001 Datasheet
Large area diode chip for medium current photovoltaic by-pass applications, or for higher current hybrid applications. The device is rated for 1A for applications where the device will be exposed to substantial radiation flux (space). For other applications, it may be operated at higher currents. A version with attached leads is available.
FEATURES:
• Oxide passivated structure for very low leakage currents
• Epitaxial structure minimizes forward voltage drop
• Forward voltage decreases with radiation exposure
• Qualified for space applications
• Thin construction for fit with photovoltaic cells
• Rectangular shape
APPLICATIONS/BENEFITS:
• Increases efficiency of photovoltaic arrays
• Protects photovoltaic cells from reverse voltage
|
206.89 kB | 11/30/-1 | 11/30/-1 | |
mz200 Datasheet | 118.34 kB | 11/30/-1 | 11/30/-1 | |
NX2113DS Datasheet
NX2113/NX2113A Datasheet
|
722.77 kB | 11/30/-1 | 11/30/-1 | |
NX2114DS Datasheet
NX2114A Datasheet
|
808.14 kB | 11/30/-1 | 11/30/-1 | |
NX2116DS Datasheet | 405.65 kB | 11/30/-1 | 11/30/-1 | |
NX2119DS Datasheet
NX2119A Datasheet
|
496.71 kB | 11/30/-1 | 11/30/-1 | |
NX2124DS Datasheet The NX2124/2124A controller IC is a synchronous Buck controller IC designed for step down DC to DC converter applications. It is optimized to convert bus voltages from 2V to 25V to outputs as low as 0.8V voltage. The NX2124/2124A operates at fixed 300kHz, employs fixed loss-less current limiting by sensing the Rdson of synchronous MOSFET followed by hiccup feature. NX2124A has higher current limit threshold than NX2124. Feedback under voltage also triggers hiccup. |
533.87 kB | 11/30/-1 | 11/30/-1 | |
NX2138ds Datasheet The NX2138 controller IC is a compact Buck controller IC with 16 lead MLPQ package designed for step down DC to DC converter in portable applications. It can be selected to operate in synchronous mode or non-synchronous mode to improve the efficiency at light load.Constant on time control provides fast response, good line regulation and nearly constant frequency under wide voltage input range. The NX2138 controller is optimized to convert single supply up to 22V bus voltage to as low as 0.75V output voltage. Over current protection and FB UVLO followed by latch feature. Other features includes: internal boost schottky diode, 5V gate drive capability, power good indicator, over current protection, over voltage protection and adaptive dead band control. |
814.3 kB | 11/30/-1 | 11/30/-1 | |
NX2139A Datasheet The NX2139A controller IC is a compact Buck controller IC with 16 lead MLPQ package designed for step down DC to DC converter in portable applications. It |
1.04 MB | 11/30/-1 | 11/30/-1 | |
NX2141DS Datasheet
NX2141 Datasheet
|
913.86 kB | 11/30/-1 | 11/30/-1 | |
NX2142DS Datasheet
NX2142A Datasheet
|
523.61 kB | 11/30/-1 | 11/30/-1 | |
NX2147ds Datasheet The NX2147 controller IC is a step down switching controller with ability to dynamically adjust the output voltage designed for applications such as Graphic Processor Core voltage in Notebook PC products. It allows this by adjusting the reference input of the PWM comprator as oppose to the traditional method of feedback adjustment. |
588.72 kB | 11/30/-1 | 11/30/-1 | |
NX2154DS Datasheet The NX2154/2154A controller IC is a synchronous Buck controller IC designed for step down DC to DC converter applications. It is optimized to convert bus voltages from 2V to 40V to outputs as low as 0.8V voltage. The NX2154/2154A operates at fixed 300kHz. The NX2154/2154A employs fixed loss-less current limiting by sensing the Rdson of synchronous MOSFET followed by hiccup feature.NX2154A has higher current limit threshold than NX2154. Feedback under voltage also triggers hiccup. |
554.2 kB | 11/30/-1 | 11/30/-1 | |
NX2155H Datasheet | 934.49 kB | 12/10/2013 | 12/10/2013 | |
NX2158ds Datasheet
The NX2158 controller IC is a boost controller IC designed for step-up DC to DC converter applications. The NX2158 operates at programmable frequencies from 200kHz to 2MHz and employs cycle by cycle current limiting by sensing the Rdson of the NMOSFET.
Features:
- Single Supply Voltage fom 3V to 5.5V
- Programmable Frequency up to 2MHz
- Internal Digital Soft Start Function
- Cycle by Cycle Current Limiting
- Pb-free and RoHS compliant
|
120.52 kB | 11/30/-1 | 11/30/-1 | |
NX2305DS Datasheet
SINGLE SUPPLY 12V SYNCHRONOUS PWM CONTROLLER
The NX2305 controller is a combination synchronous Buck and LDO controller IC designed to convert a single 12V supply to low cost dual on board supplies.
FEATURES:
12V PWM controller plus LDO controller
Hiccup current limit by sensing Rdson of MOSFET
12V high side and low side driver
Fixed internal 300kHz for switching controller
Dual Independent Digital Soft Start Function
Adaptive Deadband Control
Enable pin available to program the Vbus UVLO
Shut Down switching and LDO via pulling down
EnSW or ENLDO pins
Pb-free and RoHS compliant
APPLICATIONS:
PCI Graphic Card on board converters
Mother board On board DC to DC applications
On board Single Supply 12V DC to DC such as
12V to 3.3V, 2.5V or 1.8V
Set Top Box and LCD Display
|
577.13 kB | 11/30/-1 | 11/30/-1 | |
NX2307DS Datasheet
NX2307 Datasheet
|
789.6 kB | 11/30/-1 | 11/30/-1 | |
NX2309DS Datasheet
SINGLE SUPPLY 12V SYNCHRONOUS PWM CONTROLLER
|
442.54 kB | 11/30/-1 | 11/30/-1 |