PD-9004G
Introduction
Do you sell wireless connectivity or IP Surveillance systems?
-- Then you need the new PowerDsine PD-9004G PoE Midspan for optimal network flexibility powering edge Ethernet-based devices.
A stand-alone 4-port midspan, the PowerDsine 9004G PoE midspan is ideal for deployment of IP camera and Wireless network upgrades. Delivering up to 30W of power per port, the PD-9004G is IEEE 802.3at compliant and is ideal for deployments where 3-12 Ethernet end-devices are being deployed. Keep PoE infrastructure separate from data networks for optimal network flexibility and cost-efficiency. Buy only the PoE ports you need and upgrade as your network expands.
Combine with the PowerDsine PoE-extender for even greater access and placement of cameras and APs to remote and hard to reach locations. 
Order Information
| Part Number | Name | Description |
| PD-9004G/AC | PowerDsine 9004G | 4-port, 30W, IEEE 802.3at PoE midspan |
Specification
| Parameter | Description |
| No. of Ports | 4 |
| Pass Through Data Rates | 10/100/1000 Mbps |
| Power over Ethernet Output | Pin Assignment and Polarity: 4/5 (+), 7/8 (–) Output Power Voltage: 55Vdc User Port Power: 30W guaranteed |
| Input Power | AC Input Voltage: 90 to 264 Vac AC Input Current: 1.6A @ 110Vac 0.8A @ 240Vac AC Frequency: 50 to 60 Hz |
| Dimensions | 148 mm x 224 mm x 43 mm 5.82 in. x 8.82 in. x 1.69 in. |
| Weight | 1.4 lbs (.62 kg) |
| Indicators | System Indicator: AC Power (Green) User Indicator: Channel Power (Green) |
| Connectors | PoE ports and management port: Shielded RJ-45, EIA 568A and 568B Console Port: USB Connector Type B DC Connector: DC Block Terminal RPS Com Connector: HD-D-sub-15 |
| Environmental Conditions | Operating Ambient Temperature: 32º to 104ºF (0 to 40ºC) Operating Humidity: Maximum 90%, Non-condensing Storage Temperature: –4º to 158ºF (–20º to 70ºC) Storage Humidity: 95%, Non-condensing Operating Altitude: –1000 to 10,000 ft. (–304.8 to 3048 m) |
| Thermal Rating | 70 BTU/Hr (@240VAC) |
| Warranty | 1 year |
| Regulatory Compliance | IEEE 802.3af (PoE), RoHS Compliant WEEE Compliant, CE |
| Electromagnetic Emission & Unity | FCC Part 15, Class B EN 55022 Class B (Emissions) EN 55024 (Immunity), VCCI |
| Safety Approvals | UL/cUL Per EN 60950 GS Mark Per EN 60950 |
PD-9501G-24VAC
Introduction
Single port Gigabit Midspan, 30W
The PowerDsine 9001GR is a single port solution for remote powering of high power edge devices requiring up to 30W of scalable power-over-Ethernet.
The IEEE 802.at standard PD 9001GR PoE midspan was recently upgraded to a smaller form factor but still comes with the industry leading PowerDsine PoE technology that enables 30W of PoE over standard Cat5 or better cables to easily upgrade IP surveillance devices, WLAN APs and other Ethernet devices. This plug and play device allows easy installation and placement in hard-to-reach places. Combined with a PoE extender, Ethernet devices can easily be powered more than 100M away from network room at gigabit data transfer rates.
Features:
- Up to 30W of power
- Cisco and legacy PoE support*
- IEEE802.3at compliant
- Plug-and-play installation
Specification
| Parameter | Description | ||||||||
| No. of Ports | 1 | ||||||||
| Pass Through Data Rates | 10/100/1000 Mbps | ||||||||
| Power over Ethernet Output | Pin Assignment and Polarity: 4/5 (+), 7/8 (–) Output Power Voltage: 55Vdc User Port Power: 36W Typ. |
||||||||
| Input Power Requirements |
AC Input Voltage: 100 to 240 Vac |
||||||||
| Dimensions | 55 mm (W) x 32.5mm (H) x 140 mm (L) | ||||||||
| Weight | .44 lbs (200g) | ||||||||
| Indicator |
AC Power (Yellow) |
||||||||
| Connectors | Shielded RJ-45, EIA 568A and 568B | ||||||||
| Environmental Conditions |
|
||||||||
| Warranty | 1 year | ||||||||
| Regulatory Compliance | IEEE 802.3at (PoE) RoHS Compliant, WEEE Compliant, CE |
||||||||
| Electromagnetic Emissions & Immunity | FCC Part 15, Class B EN 55022 Class B (Emissions) EN 55024 (Immunity), VCCI |
||||||||
| Safety Approvals | UL/cUL Per IEC 60950-1 GS Mark Per IEC60950-1 |
PoE Systems for OEM
Providing easy, low-cost power over new and existing Ethernet infrastructure
Power-over-Ethernet (PoE) technology is seeing increasing adoption because of the enhanced convenience, efficiency and flexibility of supplying power over the same CAT5 or better cabling infrastructure as Data. The ability to install new Ethernet end-terminals without regard to AC outlets is particularly attractive in applications that support the growing influx of mobile devices to enterprise such as:- VoIP phones
- Access control systems
- Network security cameras
- Wireless access points
As well as thin/zero clients - which are regaining in popularity in the cloud computing environment, and other emerging technologies.
Microsemi(R) offers a range of PoE Systems that enable delivery of up to 95 watts of scalable, energy efficient Power over HdbaseT (PoH) and PoE over standard CAT-5 or better cabling.
By leveraging Ethernet infrastructure to deliver PoE technology, Ethernet-based devices can be easily installed in the most appropriate location, without the need to replace an existing Ethernet switch, nor install separate AC power cabling.
Core Competency: PoE
Microsemi has been the thought leader in PoE technology since it was originally introduced (by PowerDsine) in 1998 and continues to lead the charge having invented more PoE patents than any other company, learn why more than 30% of all devices on the market trust Microsemi with their PoE technology needs.Download the 2012 PoE IC & Systems Brochure
Download the PowerDsine OEM Product Catalog
Next-gen OEM systems
Microsemi offers an array of next-generation midspan systems for leading edge OEM customers looking to offer the latest PoE technology and convenience in their powered Ethernet devices.
To learn more about the range of PoE products available please contact: This email address is being protected from spambots. You need JavaScript enabled to view it.
PD-9501G/SP
Introduction
Single-port solution for installation of emerging high-power outdoor based Ethernet devices.
Generating a maximum of 60W, the PD-9501G/SP enables remote power for a new range of applications including pan-tilt-zoom (PTZ) cameras, video-phones and thin-clients. It complies to IEEE 802.3af/at PoE standard parameters, while doubling the available power. It can power both existing 10/100Base-T network devices and such emerging wireless gigabit devices as Wi-MAX and remote distance wireless IEEE 802.11n access points.
Specification
| Parameter | Description |
| Number of Ports | 1 |
| Pass Through Data Rates | 10/100/1000 Mbps |
| Power over Ethernet Output |
Pairs 1/2 (–) and 3/6 (+) Spare Pairs 7/8 (–) and 4/5 (+) Output Power Voltage: 54-57Vdc User Port Power: 60Watts Max |
| Input Power Requirements |
AC Input Voltage: 100 to 240 Vac AC Input Current: 1.2A @ 100-240 Vac AC Frequency: 50 to 60 Hz |
| Dimensions |
87.9 mm x 43 mm x 166 mm 3.46 in. x 1.68 in. x 6.53 in. |
| Weight | .881 lbs (400g) |
| Indicators |
System Indicator: Green—AC Power Channel Power: Green and orange |
| Connectors |
Shielded RJ-45, EIA 568A and 568B |
| Environmental Conditions |
Operating Ambient Temperature:
Storage Temperature:
Storage Humidity:
Operating Altitude:
|
| Reliability | MTBF: 100,000 hrs. @25ºC |
| Surge Protection |
Meets Surge Protection as specified in GR-1089-Core Criteria B: ± 1000V/100A @10/1000 [µS] Waveform ± 2500V/500A @2/10 [µS] Waveform ± 1000V/25A @10/360 [µS] Waveform |
| Warranty | 1-year |
| Regulatory Compliance |
IEEE 802.3af (PoE), IEEE 802.3at (including 2-event), RoHS Compliant, WEEE Compliant, CE |
| Electromagnetic Emission & Immunity |
EN 55022 Class B (Emissions) EN 55024 (Immunity), VCCI |
| Safety Approvals |
UL/cUL Per EN 60950-1 GS Mark Per EN 60950-1 |