Manufacture Diodes, IGBTs, LED Driver, Small Signal & Analog, RF Power, SCR, WLAN Power Amplifier, Backlight Inverter, CCFL Inverter, Power Modules, RF Transistors, Power Over Ethernet, PoE, PoE IC


keyword search:			part number search:

PowerDsine 7000G Family

PowerDsine 6500 Family

PowerDsine 7001G

PowerDsine 6000 Family

PowerDsine 6000G Family

PowerDsine 3500 Family

PowerDsine 3012/3006

PowerDsine 3001/3001G

PowerDsine 8000 Family

Splitters

PoE Tester

Compatible PoE Devices

PowerDsine Power Over Ethernet (PoE) Tester

Introduction | Specifications | Data Sheet [pdf]

Check your RJ-45 outlet for power using the PowerDsine PoE Tester

The Power over Ethernet (PoE) Tester, connected to an RJ-45 outlet, tests the cabling infrastructure for the presence of power, either IEEE802.3af standard-compliant or pre-standard.
The PoE Tester identifies the existence and type of Power Sourcing Equipment (either Endspan or Midspan) in your network.

PowerDsine^® PoE Tester

Features

Tests RJ-45 outlet for Power over Ethernet existence
Indicates the type of power source
Detects:
- IEEE 802.3af midspans and switches
- Cisco pre-standard in-line switches
- High Power midspans
Compact design specifically tailored for system integrators and installers
Plug and play,simple to use

System Description

A PoE system comprises a PSE (Power Sourcing Equipment)and a PD (Powered Device).

The PSE may either be an End-span (i.e. a layer 2 Ethernet Switch with integrated PoE) or a mid-span, while the PD is a PoE-enabled terminal, such as IP phone, Wireless LAN access point and Network Security Camera.

The PoE Tester check your RJ-45 outlet for power and identify its source, Midspan or Endspan, i.e. IEEE 802.3af standard compliant Midspans/Switches and Cisco pre-standard Proprietary In-line Switches.

How to use the PoE Tester:

Connect a standard category 5 cable with RJ-45 connectors to the PoE tester and the RJ-45 outlet (See diagram).
Check the LED indicators on the front panel for power and source (PoE switch,Midspan or High Power Midspan).

LED	Status	Indication
Midspan Switch	Off Off	Power is not detected in the RJ-45 outlet
Midspan Switch	Blue Off	Power is detected in the RJ-45 outlet. It is originated from a standard 802.3af Midspan^* ^* Few PoE switches are designed to transmit power on the spare pairs, in these cases, the Midspan LED will be illuminated
Midspan Switch	Off Blue	Power is detected in the RJ-45 outlet. It is originated from a standard 802.3af Switch.
Midspan Switch	Off Blinking Blue (every 7-9 Sec)	Power is detected in the RJ-45 outlet. It is originated from a Cisco Non-Standard Switch.
Midspan Switch	Blue Blue	Power is detected in the RJ-45 outlet. It is originated from a PowerDsine High Power Midspan.