FLASHPRO LITE

FLASHPRO LITE

Overview

FlashPro Lite is used exclusively with the ProASIC^PLUS family. FlashPro Lite provides all required programming voltages. The programming connection to the target board is a 26-pin SAMTEC micro header on the target board. A replaceable programming cable is connected to the FlashPro Lite. FlashPro Lite is conveniently powered by the target board.

If the PC/Laptop does not have a parallel port a PCMCIA to parallel port converter can be used as an alternative. To program the ProASIC^PLUSdevice via USB, QuickFlash Programmercan be used as an alternative. Microsemi has tested the functionality of the QuickFlash Programmer. However, Microsemi is not responsible for programming or functional failures resulting from the usage of this third party programmer.

Key Features

Supports in-system programming
Supports IEEE 1149 JTAG programming through STAPL
Supports USB 2.0 available

Pricing

Part Number	^Price
FLASHPRO LITE	USD 150

Features comparison of Hardware Programmers

Features	FlashPro6^1,7	FlashPro5²	FlashPro4³	FlashProLite
Supported Devices	PolarFire SoC⁶ , PolarFire, SmartFusion2, IGLOO2, RTG4,	PolarFire SoC⁶,PolarFire, SmartFusion2, IGLOO2, RTG4 SmartFusion, IGLOO, ProASIC3, Fusion RT ProASIC3,	PolarFire SoC⁶, PolarFire, SmartFusion2, IGLOO2, RTG4 SmartFusion, IGLOO, ProASIC3, Fusion RT ProASIC3,	ProASICPLUS
JTAG Programming
SPI-Slave Programming	PolarFire SoC⁶, PolarFire,SmartFusion2,IGLOO2,	SmartFusion2,IGLOO2
SmartDebug Support
Synopsys Identify Support
SoftConsole Support	Available with SoftConsole v5.0 and later releases	Available with SoftConsole v4.0 and later releases
USB3.0(super speed)
USB 2.0 (high speed)
USB 1.1
Parallel Port

Notes:

Libero SoC v12.2 / FlashPro Express v12.2 / SmartDebug v12.2 software or later versions are required to use FlashPro6
Libero SoC v11.4/Libero SoC PolarFire v1.1/ FlashPro v11.4 software or later versions are required to use FlashPro5.
Libero IDE v8.6 SP1 or FlashPro v8.6 SP1 software or later versions are required to use FlashPro4.
FlashPro and FlashProExpress software support our earlier discontinued hardware programmer FlashPro3 also. For more information, read the product discontinuation notification.
Libero v12.3 / FlashProExpress 12.3 / SmartDebug v12.3 software or later version are required to user Flashpro6 for SPI-Flash Programming. It also require FlashPro6 to be updated.Scroll down for more details.
Libero SoC v12.5 or later supports PolarFire SoC

ROHS

Resources

	Guides
	FlashPro Lite Device Programmer Quickstart Card

	Silicon User’s Guides
	UG0602: RTG4 FPGA Programming User Guide
	UG0714: PolarFire FPGA Programming User Guide

	SoC
	UG0451: SmartFusion2 and IGLOO2 Programming User Guide

Ordering

Support

This part can be found in the following product categories:

Products

Services

Automotive

Commercial Aviation

Communications

Data Centers

Defense

Industrial

Medical

Space

System Solutions

How to Buy

Company

Accelerate Ecosystem Partners

Empower Channel Partners

Solution Partners

Documents and Resources

Design Support

Contact Support

Product Portals

Quality & Packaging

Returns

Training

Overview

Pricing

Features comparison of Hardware Programmers

Resources

Ordering

Support

FPGA & SoC

Registered Users & Partners

How to Buy

Company

Solution Partners

Quality & Packaging

FLASHPRO LITE

Overview

Pricing

Features comparison of Hardware Programmers

Resources

Ordering

Support

Stay Informed✚