M2S090TS-EVAL-KIT

M2S090TS-EVAL-KIT	Product Status In Production

Overview

SmartFusion2 Security Evaluation Kit

Microsemi's SmartFusion®2 Security Evaluation Kit makes it easy to develop secure embedded systems and provides the best-in-class solutions for both Design Security—when protecting your design IP is critical; and Data Security—when protecting application data is necessary. The kit provides a cost-effective SoC FPGA platform for developing cost-optimized SoC FPGA designs using Microsemi's SmartFusion2 System-on-Chip (SoC) FPGAs, which integrates inherently reliable flash-based FPGA fabric, a 166 MHz ARM®Cortex®-M3 processor, advanced data security features, DSP blocks, SRAM, eNVM, and industry-required high-performance communication interfaces—all on a single chip.
In addition, the SmartFusion2 Security Evaluation Kit comes with a large 90K LE device to make it easy to develop transceiver I/O-based FPGA designs to build PCI Express® and Gigabit Ethernet-based systems and also have room for large IP blocks to complement the design. The board is also small form-factor PCIe compliant, which will allow quick prototyping and evaluation using any desktop PC or laptop with a PCIe slot. The kit enables you to:

Evaluate the Data Security features of SmartFusion2 SoC FPGAs including:

Elliptic Curve Cryptography (ECC)
SRAM-PUF (Physically Unclonable Function)
Random Number Generator (RNG)
AES/SHA
Anti-Tamper

Develop and test PCI Express Gen2 x1 lane designs
Test the signal quality of the FPGA transceiver using full-duplex SERDES SMA Pairs
Measure the low power consumption of the SmartFusion2 SoC FPGA
Quickly create a working PCIe link with the included PCIe Control Plane Demo

The board includes an RJ45 interface to 10/100/1000 Ethernet, 512 Mb of LPDDR, 64 Mb SPI Flash, and USB-UART connections, as well as I2C, SPI, and GPIO headers. The kit includes a 12 V power supply but can also be powered through the PCIe edge connector. Also, included is a 1-year free Gold License for the Libero®SoC software toolset to enable FPGA development and to utilize the reference designs made available with the kit.

Kit Contents

Quantity	Description
1	SmartFusion2 SoC FPGA 90K LE M2S090TS-FGG484
1	12V Wall-Mounted Power Supply
1	FlashPro4 JTAG programmer
1	USB 2.0 A male to mini-B cable for UART/power interface (up to 1A) to PC
1	Quickstart Card
1	Software ID letter for Libero Gold License

Note: This kit includes a free 1-year Libero Gold node locked license (worth $995)

Hardware Feature Overview

90K LE SmartFusion2 SoC FPGA in the FGG484 package (M2S090TS-FGG484)
64 Mb SPI Flash memory
512 Mb LPDDR
PCI Express Gen2 x1 interface
Four SMA connector for testing of full-duplex SERDES channel
RJ45 interface for 10/100/1000 Ethernet
JTAG/SPI programming interface
Headers for I2C, SPI, GPIOs
Push-button switches and LEDs for demo purposes
Current Measurement Test Points

SmartFusion®2 Security Evaluation Kit Block Diagram

Licensing

Starting 13th March 2017, due to changes in licensing options, SmartFusion2 Evaluation Kit (M2S090TS-EVAL-KIT) will require a Libero Gold license. Please refer CN17012 to read more about new licensing options.
Microsemi is including a 1 year Libero Gold node locked license (worth $995) free with the kit purchase.

Please refer to one of the below options to generate a license for your kit. If you have received an updated kit there will be a letter with Software ID included, for prior kits we provide an alternative method to request the license to cover existing inventory in stocks with distributors.

If you have received a Software ID letter with your kit, please follow the steps below to generate a Gold license for your kit.

Follow this link to go to the licensing page to register your Software ID
If you are a new user you will be directed to create a Customer Portal Account. Returning users please use your credentials to Login.
In the field marked Software ID for purchased products, please enter the Software ID mentioned in the Software ID letter which was shipped with the kit.
Once you have submitted the request, you will get the license file within 1 hour.

If you did not receive a Software ID letter, please follow the below steps to generate a Gold license as per the new licensing options.

An access code is mentioned on the last page of Quickstart card which was supplied in the M2S090TS-EVAL-KIT shipped to you. Please use it to claim a license.
Now, claim a free 1-year Libero Gold license using the following link: Claim License.
Once you have submitted the details, Microsemi will respond to the email ID provided by you. It may take up to 2-3 working days.

ROHS

Package Carrier:

Box

Resources

	ASIC, SoC and FPGA
	PDN 1502: Last Time Buy for the SmartFusion2 Evaluation Kit (M2S-EVAL-KIT)

	App Notes
	AC392: SmartFusion2 SoC FPGA SRAM Initialization from eNVM - Libero SoC v11.4 Application Note

	Tutorial
	TU0310: Interfacing User Logic with the Microcontroller Subsystem - Libero SoC v11.6 Design Flow Tutorial
	TU0487: Creating a Libero Project for Firmware Catalog Sample Project - Libero SoC v11.5 and SoftConsole Flow Tutorial for SmartFusion2
	TU0487: Creating a Libero Project for Firmware Catalog Sample Project - Libero SoC v11.6 and SoftConsole Flow Tutorial for SmartFusion2
	TU0530: SmartFusion2 and IGLOO2 SmartDebug Hardware Design Debug Tools - Libero SoC v11.6 Tutorial
	TU0530: SmartFusion2 and IGLOO2 SmartDebug Hardware Design Debug Tools - Libero SoC v11.7 Tutorial
	TU0546: Accessing Serial Flash Memory Using SPI Interface - Libero SoC v11.5 and SoftConsole Flow Tutorial for SmartFusion2
	TU0546: SoftConsole v4.0 and Libero SoC v11.6 Tutorial
	TU0547: Accessing Serial Flash Memory Using SPI Interface - Libero SoC v11.5 and IAR Embedded Workbench Flow Tutorial for SmartFusion2
	TU0547: Accessing Serial Flash Memory Using SPI Interface - Libero SoC v11.6 and IAR Embedded Workbench Flow Tutorial for SmartFusion2
	TU0548: Accessing Serial Flash Memory Using SPI Interface - Libero SoC v11.5 SoC and Keil uVision Flow for SmartFusion2 Tutorial
	TU0548: Accessing Serial Flash Memory Using SPI Interface - Libero SoC v11.6 SoC and Keil uVision Flow for SmartFusion2 Tutorial
	TU0570: Implementing a SmartFusion2/IGLOO2 SERDES EPCS Protocol Design - Libero SoC v11.6 Tutorial

	Software User’s Guides
	DG0388: SmartFusion2 - Error Detection and Correction of eSRAM Memory - Libero SoC v11.6 User Guide

	Design Files
	Design files for UG0594

	SoC
	AC389: SmartFusion2 SoC FPGA - Cache Controller Configuration - Libero SoC v11.7 Application Note
	AC391: SmartFusion2 SoC FPGA - eNVM Initialization - Libero SoC v11.7 Application Note
	AC392: SmartFusion2 SoC FPGA SRAM Initialization from eNVM - Libero SoC v11.7 Application Note
	AC400: SmartFusion2 SoC FPGA Flash*Freeze Entry and Exit - With SoftConsole - Libero SoC v11.8 Application Note
	AC407: Using NRBG Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.8 Application Note
	AC410: Using AES System Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.7 Application Note
	AC410: Using AES System Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.8 Application Note
	AC426: Implementing Production Release Mode Programming for SmartFusion2 - Libero SoC v11.7 Application Note
	AC428: SmartFusion2 and IGLOO2 - DDR Low Power Modes - Libero SoC v11.7 Application Note
	AC429: SmartFusion2 and IGLOO2 - Accessing eNVM and eSRAM from FPGA Fabric - Libero SoC v11.8 Application Note
	AC430: SmartFusion2 I2C Reference Design using Multiple Masters and Multiple Slaves - Libero SoC v11.7 Application Note
	AC432: Using SHA-256 System Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.8 Application Note
	AC433: Using Zeroization in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.6 Application Note
	AC434: Using SRAM PUF System Service in SmartFusion2 - Libero SoC v11.7 Application Note
	AC435: Using ECC System Service in SmartFusion2 - Libero SoC v11.7 Application Note
	AC436: Using Device Certificate System Service in SmartFusion2 - Libero SoC v11.7 Application Note
	AC437: Implementing PCIe Reset Sequence in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.8 SP3 Application Note
	AC451: SmartFusion2 based Serial Display Solution - Using OpenGL SC Graphics Library and SPI interface User Guide - Libero SoC v11.7 Application Note
	DG0388: SmartFusion2 - Error Detection and Correction of eSRAM Memory - Libero SoC v11.7 Demo Guide
	DG0388: SmartFusion2 - Error Detection and Correction of eSRAM Memory - Libero SoC v11.8 Demo Guide
	DG0438: SmartFusion2 SoC FPGA DSP FIR Filter - Libero SoC v11.7 Demo Guide
	DG0441: SmartFusion2 SoC FPGA Adaptive FIR Filter - Libero SoC v11.8 SP1 Demo Guide
	DG0454: SmartFusion2 SoC FPGA - In-System Programming Using UART Interface Demo - Libero SoC v11.6 Demo Guide
	DG0454: SmartFusion2 SoC FPGA - In-System Programming Using UART Interface Demo - Libero SoC v11.8 Demo Guide
	DG0471: SmartFusion2 SoC FPGA - In-System Programming Using USB OTG Controller Interface - Libero SoC v11.6 Demo Guide
	DG0471: SmartFusion2 SoC FPGA - In-System Programming Using USB OTG Controller Interface - Libero SoC v11.8 Demo Guide
	DG0476: SmartFusion2 - USB OTG Capabilities - Libero SoC v11.7 Demo Guide
	DG0501: SmartFusion2 PCIe MSS HPDMA - Libero SoC v11.7 Demo Guide
	DG0517: SmartFusion2 and IGLOO2 PCIe Data Plane Demo using 2 Channel Fabric DMA - Libero SoC v11.7 Demo Guide
	DG0517: SmartFusion2 and IGLOO2 PCIe Data Plane Demo using 2 Channel Fabric DMA - Libero SoC v11.8 Demo Guide
	DG0565: SmartFusion2 Low Standby Power - Libero SoC v11.7 Demo Guide
	DG0566: SmartFusion2 SoC FPGA PCIe Control Plane Demo For Advanced Development Kit - Libero SoC v11.8 SP1 Demo Guide
	DG0568: Interfacing SmartFusion2 SoC FPGA with External LPDDR Memory through MDDR Controller Through MDDR Controller - Libero SoC v11.8 SP1 Demo Guide
	DG0584: SmartFusion2 SoC FPGA In-Application Programming Using PCIe Interface - Libero SoC v11.8 Demo Guide
	DG0611: Implementing the JESD204B Interface using SmartFusion2 - Libero SoC v11.8 Demo Guide
	DG0634: Running CoreTSE AHB IP based Webserver on SmartFusion2 using lwIP and FreeRTOS ‰ÛÒ Libero SoC v11.7 SP2 Demo Guide
	DG0635: Implementing Programming Recovery and In-Application Programming Features Using Ethernet Interface for SmartFusion2 Devices - Libero SoC v11.8 SP1 Demo Guide
	DG0636: Implementing Auto Update and Programming Recovery Features (Using Ethernet Interface) for SmartFusion2 Devices - Libero SoC v11.7 Demo Guide
	DG0636: Implementing Auto Update and Programming Recovery Features (Using Ethernet Interface) for SmartFusion2 Devices - Libero SoC v11.8 SP1 Demo Guide
	DG0669: SmartFusion2 Code Shadowing from SPI Flash to LPDDR Memory - Libero SoC v11.7 Demo Guide
	TU0310: Interfacing User Logic with the Microcontroller Subsystem - Libero SoC v11.7 Design Flow Tutorial
	TU0456: SmartFusion2 SoC FPGA PCIe Control Plane - Libero SoC v11.8 SP1 Tutorial
	TU0487: Creating a Libero Project for Firmware Catalog Sample Project - Libero SoC v11.7 and SoftConsole Flow Tutorial for SmartFusion2
	TU0530: SmartFusion2 and IGLOO2 SmartDebug Hardware Design Debug Tools - Libero SoC v11.8 SP1 Tutorial
	TU0546: SoftConsole v4.0 and Libero SoC v11.7 Tutorial
	TU0547: Accessing Serial Flash Memory Using SPI Interface - Libero SoC v11.7 and IAR Embedded Workbench Flow Tutorial for SmartFusion2
	TU0548: Accessing Serial Flash Memory Using SPI Interface - Libero SoC v11.7 SoC and Keil uVision Flow for SmartFusion2 Tutorial
	TU0570: Implementing a SmartFusion2/IGLOO2 SERDES EPCS Protocol Design - Libero SoC v11.7 Tutorial

	Guides
	DG0611: Implementing the JESD204B Interface using SmartFusion2 - Libero SoC v11.6 Demo Guide
	DG0669: SmartFusion2 Code Shadowing from SPI Flash to LPDDR Memory - Libero SoC v11.6 Demo Guide
	AC392: SmartFusion2 SoC FPGA SRAM Initialization from eNVM Application Note
	DG0438: SmartFusion2 SoC FPGA DSP FIR Filter - Libero SoC v11.6 Demo Guide
	DG0441: SmartFusion2 SoC FPGA Adaptive FIR Filter - Libero SoC v11.6 Demo Guide
	DG0476: SmartFusion2 - USB OTG Capabilities - Libero SoC v11.6 Demo Guide
	DG0501: SmartFusion2 PCIe MSS HPDMA - Libero SoC v11.6 Demo Guide
	DG0517: SmartFusion2 and IGLOO2 PCIe Data Plane Demo using 2 Channel Fabric DMA - Libero SoC v11.6 Demo Guide
	DG0565: SmartFusion2 Low Standby Power - Libero SoC v11.6 Demo Guide
	DG0566: SmartFusion2 SoC FPGA PCIe Control Plane Demo For Advanced Development Kit - Libero SoC v11.5 Demo Guide
	DG0566: SmartFusion2 SoC FPGA PCIe Control Plane Demo For Advanced Development Kit - Libero SoC v11.6 Demo Guide
	DG0566: SmartFusion2 SoC FPGA PCIe Control Plane Demo For Advanced Development Kit - Libero SoC v11.6 Demo Guide
	DG0568: Interfacing SmartFusion2 SoC FPGA with External LPDDR Memory through MDDR Controller - Libero SoC v11.6 Demo Guide
	DG0611: Implementing the JESD204B Interface using SmartFusion2 - Libero SoC v11.6 Demo Guide
	DG0634: Running CoreTSE AHB IP based Webserver on SmartFusion2 using lwIP and FreeRTOS ‰ÛÒ Libero SoC v11.6 Demo Guide

	Application Note
	AC428: SmartFusion2 and IGLOO2 - DDR Low Power Modes - Libero SoC v11.6 Application Note
	AC389: SmartFusion2 Cache Controller Configuration App Note
	AC389: SmartFusion2 SoC FPGA - Cache Controller Configuration - Libero SoC v11.4 Application Note
	AC389: SmartFusion2 SoC FPGA - Cache Controller Configuration - Libero SoC v11.6 Application Note
	AC391: SmartFusion2 SoC FPGA - eNVM Initialization - Libero SoC v11.4 Application Note
	AC391: SmartFusion2 SoC FPGA - eNVM Initialization - Libero SoC v11.6 Application Note
	AC391: SmartFusion2 SoC FPGA - eNVM Initialization Application Note
	AC392: SmartFusion2 SoC FPGA SRAM Initialization from eNVM - Libero SoC v11.6 Application Note
	AC400: SmartFusion2 Flash*Freeze Entry and Exit - With SoftConsole
	AC400: SmartFusion2 Flash*Freeze Entry and Exit - With SoftConsole - Libero SoC v11.4
	AC400: SmartFusion2 Flash*Freeze Entry and Exit - With SoftConsole - Libero SoC v11.6 Application Note
	AC400: SmartFusion2 SoC FPGA Flash*Freeze Entry and Exit - With SoftConsole - Libero SoC v11.7 Application Note
	AC407: Using Non-Deterministic Random Bit Generator (NRBG) Services in SmartFusion2 SoC/IGLOO2 FPGAs
	AC407: Using NRBG Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.6 Application Note
	AC407: Using NRBG Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.7 Application Note
	AC407: Using NRBG Services in SmartFusion2 SoC and IGLOO2 FPGA Devices - Libero SoC v11.4 Application Note
	AC410 - Using Advanced Encryption Standard System Services in the SmartFusion2 and IGLOO2 Devices
	AC410: Using AES System Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.4 Application Note
	AC410: Using AES System Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.6 Application Note
	AC426: Implementing Production Release Mode Programming for SmartFusion2 - Libero SoC v11.4 Application Note
	AC426: Implementing Production Release Mode Programming for SmartFusion2 - Libero SoC v11.6 Application Note
	AC429: SmartFusion2 and IGLOO2 - Accessing eNVM and eSRAM from FPGA Fabric - Libero SoC v11.4 Application Note
	AC429: SmartFusion2 and IGLOO2 - Accessing eNVM and eSRAM from FPGA Fabric - Libero SoC v11.6 Application Note
	AC430: SmartFusion2 I2C Reference Design using Multiple Masters and Multiple Slaves - Libero SoC v11.4 Application Note
	AC430: SmartFusion2 I2C Reference Design using Multiple Masters and Multiple Slaves - Libero SoC v11.6 Application Note
	AC430: SmartFusion2 I2C Reference Design using Multiple Masters and Multiple Slaves - Libero SoC v11.6 Application Note
	AC432: Using SHA-256 System Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.6 Application Note
	AC432: Using SHA-256 System Services in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.7 Application Note
	AC432: Using SHA-256 System Services in the SmartFusion2 and IGLOO2 Devices Libero SoC v11.4
	AC434: Using SRAM PUF System Service in SmartFusion2 - Libero SoC v11.4 Application Note
	AC434: Using SRAM PUF System Service in SmartFusion2 - Libero SoC v11.6 Application Note
	AC435: Using ECC System Service in SmartFusion2 - Libero SoC v11.4 Application Note
	AC435: Using ECC System Service in SmartFusion2 - Libero SoC v11.6 Application Note
	AC436: Using Device Certificate System Service in SmartFusion2 - Libero SoC v11.6 Application Note
	AC437: Implementing PCIe Reset Sequence in SmartFusion2 and IGLOO2 Devices - Libero SoC v11.6 Application Note
	DG0611: Implementing the JESD204B Interface using SmartFusion2 - Libero SoC v11.7 Demo Guide

	Hardware User’s Guides
	QG0575: SmartFusion2 SoC FPGA Security Evaluation Kit Quickstart Guide
	UG0594: SmartFusion2 Security Evaluation Kit User Guide

	Dev Kit - Board References
	SmartFusion2 Security Evaluation Kit Board Files (RevD)
	SmartFusion2 Security Evaluation Kit Board Files(Rev E)

Ordering

Distributor	SKU	Stock	MOQ	Pkg
Arrow Electronics, Inc.	M2S090TS-EVAL-KIT	18	1	..	Buy Now
Digi-Key	1100-1228-ND	34	1	Box	Buy Now
Future Electronics	9055759		1	Kit	No Stock
Mouser	494-M2S090TSEVAL-KIT	1	..	..	Buy Now

Support

This part can be found in the following product categories:

FPGA & SoC FPGA Development Kits & Solutions SmartFusion2 Kits

Products

Services

Automotive

Commercial Aviation

Communications

Data Centers

Defense

Industrial

Medical

Space

System Solutions

How to Buy

Company

Careers

Search Jobs

Accelerate Ecosystem Partners

Empower Channel Partners

Solution Partners

Documents and Resources

Design Support

Contact Support

Product Portals

Quality & Packaging

Returns

Training

Overview