A2F-EVAL-KIT-2

SmartFusion Evaluation Kit

The SmartFusion Evaluation Kit board includes:

• A2F200M3F-FGG484
• 200,000 System FPGA gates, 256 KB flash memory, 64 KB SRAM, and additional distributed SRAM in the FPGA fabric and external memory controller
• Peripherals include Ethernet, DMAs, I2Cs, UARTs, timers, ADCs, DACs and additional analog resources
• Refer to the SmartFusion product page for full device information
• SPI-flash memory connected to SPI_0 on the device
• USB connection for programming and debug from Microsemi's design tools
• USB to UART connection to UART_0 for HyperTerminal examples
• 10/100 Ethernet interface with on-chip MAC and external PHY
• RVI header for application programming and debug from either Keil or IAR Systems
• Mixed-signal header for daughter card support

User Inputs and Outputs

• First-order ?? DAC (sigma delta) output with 12-bit 500 Ksps update rate
• Potentiometer used to vary voltage input for voltage and current monitoring
• 8 LEDs connected to the FPGA fabric for FPGA demonstration
• Jumpers for individual access to 4 out of 8 LEDs
• 2 user input switches connected through FPGA fabric
• Both LEDs and switches can be used with GPIO by connecting through the fabric
• Selector to choose between GNU SoftConsole or RVI-Header for debug
• Selector to switch between programming the device (fabric) and debug mode
• On-board 20 MHz crystal for system clock
• On-board 32.768 KHz for RTC
• 5 user I/Os for debug
• Access to header for unused I2C_1 peripheral
• Access to header for unused SPI_1 peripheral
• Access to header for unused UART_1 peripheral
• Access to VAREFOUT header
• Option to use internal 1.5 V regulator