Datasheets
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
PD69108 Datasheet
Microsemi’s PD69108 Power over Ethernet (PoE) Manager integrates power, analog and state of the art logic into a single 48 pin, plastic QFN package. The device is used in Ethernet switches and Midspans, enabling network devices to share power and data over the same cable. The PD69108 device is an 8 ports, mixed-signal, high-voltage PoE driver. It enables detection of IEEE802.3at-2009 compliant Type 1 and Type 2 PDs (Powered Devices), ensuring safe power feeding and disconnection of ports with full digital control and a minimum of external components. The PD69108 executes all real time functions as specified in the IEEE802.3af-2003 (“AF”) and IEEE802.3at-2009 High Power (“AT”) standards, including load detection and “AF” and “AT” classification. In addition, the PD69108 features Multiple Classification Attempts (MCA) port status monitoring, and provides system level activities such as power management and MIB support for system management. The PoE device is designed to detect and disable disconnected ports utilizing DC disconnection methods, as specified in the IEEE 802.3af-2003 and IEEE802.3at-2009 standards. The unit provides PD protection such as over-load, under-load, over-voltage and short-circuiting. It supports supply voltages ranging from 44 to 57 VDC with no need for additional power supply sources. The chip includes built-in internal thermal protection. Optionally, the PD69108 can detect legacy/pre-standard PD devices. The PD69108 is a low power device using an internal MOSFET and an external 0.36 ? sense resistor.
|
1.05 MB | 06/04/2013 | 10/09/2017 | |
PD69104B Datasheet | 1.21 MB | 06/06/2013 | 11/04/2014 | |
PD69104B 4 Port PSE PoE Manager PRODUCTION DATASHEET | 1.25 MB | 06/19/2013 | 11/04/2014 | |
PD69104 4 PORTS PSE POE MANAGER DATASHEET | 1.05 MB | 06/27/2013 | 04/07/2018 | |
PD69101 Datasheet | Unknown | 11/30/-1 | 05/29/2019 | |
PD69100 Datasheet | 205.17 kB | 03/07/2013 | 11/04/2014 | |
PD69012 DS 12 Ports Power Over Ethernet Manager Datasheet | 1.05 MB | 11/26/2015 | 03/28/2017 | |
PD69012 Abridged Datasheet
PD69012 device is a 12-port, mixed-signal, high voltage Power over Ethernet driver. It enables detection of IEEE802.3af-2003 compliant PDs (Powered Devices) and IEEE802.3AT High Power Devices, thus, ensuring safe power feeding and disconnection of ports. With full digital control via a serial communication interface and a minimum of external components, the device integrates into multiport and highly populated Ethernet switches and routers.
|
426.01 kB | 11/30/-1 | 11/04/2014 | |
PD69008 Datasheet
PD69008 is a eight-port, mixed-signal, high-voltage High Power over Ethernet PSE Manager. The IC allows the detection of IEEE802.3af-2003 and IEEE802.3at-draft2.0 powered devices, ensuring safe power feeding and removal over Ethernet ports. With full digital control via a serial communication interface and a minimum of external components, the IC integrates in multi-port and highly populated Ethernet switches.
|
119.6 kB | 11/30/-1 | 11/04/2014 | |
PD69008 Abridged Datasheet
PD69008 device is an 8-port, mixed-signal, high voltage Power over Ethernet driver. It enables detection of IEEE802.3af-2003 compliant PDs (Powered Devices) and IEEE802.3AT High Power Devices, thus, ensuring safe power feeding and disconnection of ports. With full digital control via a serial communication interface and a minimum of external components, the device integrates into multiport and highly populated Ethernet switches and routers.
|
459.79 kB | 11/30/-1 | 11/04/2014 | |
PD69008 -8 Ports Power Over Ethernet Manager DATASHEET | 1.51 MB | 06/19/2013 | 03/28/2017 | |
PD69000 Datasheet
PD69000 is a ninety-six-port, mixed-signal, Power over Ethernet Microcontroller Unit. Used with the PD69012 and PD69008, it allows the detection of IEEE 802.3af-2003, IEEE802.3at-draft3.2 and pre-standard devices, ensuring safe power feeding and removal over Ethernet ports. It also supports 4-pairs IEEE802.3at devices consuming up to 59W. With full digital control via a serial communication interface and a minimum of external components, the MCU integrates in multi-port and highly populated Ethernet switches.
|
103.89 kB | 11/30/-1 | 11/04/2014 | |
PD67108, PD67112, PD67124-DIMM-E mode Datasheet
The PD671xxx PoE PSE modules are fit / form compatible with the standard plug-in memory modules used in personal computers (Dual Inline Memory Modules - DIMMs). Thus, the use of these modules permit network devices to be designed for up to 96 ports, with fewer ports actually installed. Additional modules can be inserted in the field at any time.
|
526.79 kB | 11/30/-1 | 11/18/2014 | |
PD64012GH Datasheet
PD64012GH is a twelve-port, mixed-signal, high-voltage High Power over Ethernet PSE Manager. The IC allows the detection of IEEE 802.3af-2003 powered devices, ensuring safe power feeding and removal over Ethernet ports. It also supports pre-standard IEEE802.3at devices consuming up to 59.5W. With full digital control via a serial communication interface and a minimum of external components, the IC integrates in multi-port and highly populated Ethernet switches. The PD64012GH has two possible working configurations: a low-cost implementation, supporting up to 571mA and a fully IEEE802.3at-ready one. Both maintain the PD64012G Enhanced mode features, for extended functions and added flexibility with the presence of the PD63000G MCU.
|
55.39 kB | 11/30/-1 | 11/04/2014 | |
PD64012G Datasheet
PD64012G is a twelve-port, mixed-signal, high-voltage Power over Ethernet PSE Manager. The IC allows the detection of IEEE 802.3af-2003 powered devices, ensuring safe power feeding and removal over Ethernet ports. With full digital control via a serial communication interface and a minimum of external components, the IC integrates in multi-port and highly populated Ethernet switches. The PD64012G has two possible working configurations: an Automatic stand-alone mode, for basic PoE functions,and an Enhanced mode, for extended functions and added flexibility with the presence of the PD63000G and PD83000G MCU’s.
|
55.28 kB | 11/30/-1 | 11/04/2014 | |
PD64004AH Datasheet
Microsemi’s™ PD64004AH is a 4-port, mixed-signal, high-voltage Power over Ethernet (PoE) Manager designed to support IEEE 802.3af-2003 and 802.3at-2009 PoE applications.
|
746.04 kB | 11/30/-1 | 11/04/2014 | |
PD64004A Datasheet
PD64004A is a four-port, mixed-signal, high-voltage Power over Ethernet PSE Manager. The IC allows the detection of IEEE 802.3af-2003 powered devices, ensuring safe power feeding and removal over Ethernet ports. With full digital control via a serial communication interface and a minimum of external components, the IC integrates in multi-port and highly populated Ethernet switches. The PD64004A has three possible working configurations: an Automatic stand-alone mode, for basic PoE functions, the PoE+ Mode supporting legacy devices and autonomous operation with the PD33000G MCU and an Enhanced mode, for extended functions and added flexibility with the PD63000G and PD83000G MCU’s.
|
55.44 kB | 11/30/-1 | 11/04/2014 | |
PD64001 Datasheet
The PD64001 is a single-port Power over Ethernet PSE (Power Source Equipment) Manager. The PSE Manager allows for the detection of IEEE 802.3af-2003 and IEEE802.3at powered devices, ensuring safe power feeding and monitoring of Ethernet ports. With a minimum of external components, the PD64001 integrates in a one-port or two- port PoE-port switches and Midspans. The PD64001 has several operating modes, allowing it to be tailored to the customer application, be it a Switch or a Midspan, IEEE802.af or IEEE802.3at-compliant, with 1-event or 2-events classification, AC or DC disconnect and strict resistor detection or legacy detection capabilities. With a fully IEEE802.3at-compliant version and and additional 36W capable version (PD64001H) the PD64001 allows build extremely flexible 1-port PSEs.
|
378.85 kB | 11/30/-1 | 11/04/2014 | |
PD63000ACG-0606 Datasheet
PD63000ACG-0606 is a 96-port, mixed-signal, Power over Ethernet microcontroller unit. Used with the PD64012G, PD64012GH, PD64004A and PD64004AH PSE Manager ICs, it allows the detection of IEEE 802.3af-2003 and pre-standard devices, ensuring safe power feeding and removal over Ethernet ports. It also supports pre-standard IEEE802.3at devices consuming up to 50W. With full digital control via a serial communication interface and a minimum of external components, the MCU integrates in multi-port and highly populated Ethernet switches. The PD63000ACG-0606 has two possible working configurations: a low-cost implementation, supporting up to 571mA and a fully IEEE802.3at-ready configuration.
|
172.3 kB | 11/30/-1 | 01/24/2017 | |
PD63000ACG-0603 Datasheet
PD63000ACG-0603 is a 96-port, mixed-signal, Power over Ethernet microcontroller unit. Used with the PD64012G, PD64012GH, PD64004A and PD64004AH PSE Manager ICs, it allows the detection of IEEE 802.3af-2003 and pre-standard devices, ensuring safe power feeding and removal over Ethernet ports. It also supports pre-standard IEEE802.3at devices consuming up to 50W. With full digital control via a serial communication interface and a minimum of external components, the MCU integrates in multi-port and highly populated Ethernet switches. The PD63000ACG-0603 has two possible working configurations: a low-cost implementation, supporting up to 571mA and a fully IEEE802.3at-ready configuration.
|
49.99 kB | 11/30/-1 | 11/04/2014 |