Datasheets
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
PD69104 4 PORTS PSE POE MANAGER DATASHEET | 1.05 MB | 06/27/2013 | 04/07/2018 | |
PD70224 Datasheet | 3.52 MB | 05/16/2013 | 03/07/2018 | |
PD-6548/AC/M Datasheet | 116.08 kB | 11/30/-1 | 02/16/2018 | |
PD-6000G Family Datasheet | 77.85 kB | 11/30/-1 | 02/16/2018 | |
PD82000 Datasheet | Unknown | 02/09/2018 | 02/09/2018 | |
PD70100/PD70200 Datasheet | Unknown | 11/30/-1 | 02/06/2018 | |
Microsemi PDS-208G Datasheet | 674.83 kB | 01/12/2018 | 01/12/2018 | |
PD69108 Datasheet
Microsemi’s PD69108 Power over Ethernet (PoE) Manager integrates power, analog and state of the art logic into a single 48 pin, plastic QFN package. The device is used in Ethernet switches and Midspans, enabling network devices to share power and data over the same cable. The PD69108 device is an 8 ports, mixed-signal, high-voltage PoE driver. It enables detection of IEEE802.3at-2009 compliant Type 1 and Type 2 PDs (Powered Devices), ensuring safe power feeding and disconnection of ports with full digital control and a minimum of external components. The PD69108 executes all real time functions as specified in the IEEE802.3af-2003 (“AF”) and IEEE802.3at-2009 High Power (“AT”) standards, including load detection and “AF” and “AT” classification. In addition, the PD69108 features Multiple Classification Attempts (MCA) port status monitoring, and provides system level activities such as power management and MIB support for system management. The PoE device is designed to detect and disable disconnected ports utilizing DC disconnection methods, as specified in the IEEE 802.3af-2003 and IEEE802.3at-2009 standards. The unit provides PD protection such as over-load, under-load, over-voltage and short-circuiting. It supports supply voltages ranging from 44 to 57 VDC with no need for additional power supply sources. The chip includes built-in internal thermal protection. Optionally, the PD69108 can detect legacy/pre-standard PD devices. The PD69108 is a low power device using an internal MOSFET and an external 0.36 ? sense resistor.
|
1.05 MB | 06/04/2013 | 10/09/2017 | |
PD-9501GO-ET Datasheet | 587.21 kB | 08/17/2017 | 08/17/2017 | |
PD-9001GO-ET Datasheet | 585.74 kB | 08/17/2017 | 08/17/2017 | |
PD-3501G Datasheet | 543.5 kB | 04/17/2013 | 08/07/2017 | |
PD-9001GR/AC Datasheet | 544.84 kB | 04/17/2013 | 08/07/2017 | |
PDS-104GO Datasheet | 881.13 kB | 02/09/2016 | 06/04/2017 | |
DS PDS-104GO FINAL Datasheet | 881.13 kB | 09/14/2015 | 06/04/2017 | |
PoE Controller Unit PD69000 Datasheet | 189.57 kB | 06/17/2013 | 03/28/2017 | |
PD69012 DS 12 Ports Power Over Ethernet Manager Datasheet | 1.05 MB | 11/26/2015 | 03/28/2017 | |
PD69008 -8 Ports Power Over Ethernet Manager DATASHEET | 1.51 MB | 06/19/2013 | 03/28/2017 | |
PD70101/PD70201 Datasheet | 1.02 MB | 03/12/2014 | 01/26/2017 | |
PD63000ACG-0606 Datasheet
PD63000ACG-0606 is a 96-port, mixed-signal, Power over Ethernet microcontroller unit. Used with the PD64012G, PD64012GH, PD64004A and PD64004AH PSE Manager ICs, it allows the detection of IEEE 802.3af-2003 and pre-standard devices, ensuring safe power feeding and removal over Ethernet ports. It also supports pre-standard IEEE802.3at devices consuming up to 50W. With full digital control via a serial communication interface and a minimum of external components, the MCU integrates in multi-port and highly populated Ethernet switches. The PD63000ACG-0606 has two possible working configurations: a low-cost implementation, supporting up to 571mA and a fully IEEE802.3at-ready configuration.
|
172.3 kB | 11/30/-1 | 01/24/2017 | |
PD-9501GI/DC Datasheet | 339.06 kB | 09/14/2015 | 12/18/2016 |