Datasheets
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
PoE01 Datasheet
13W PD application note based on a discrete component front end, the UC3844 as the primary PWM controller and the LX1752 as the secondary side PWM controller.
|
522.82 kB | 11/30/-1 | 11/04/2014 | |
PD HiPoE Cisco Datasheet | 1.18 MB | 04/17/2013 | 11/04/2014 | |
PD-3504G Datasheet | 672.61 kB | 04/17/2013 | 11/04/2014 | |
PD-5036 Datasheet
The PD5036 is a unique pulse width modulator controller, designed primarily for a variety of high voltage sinusoidal telephone ring generator applications. The PD5036 is suitable for applications requiring up to 6 Watt and provides all necessary controls for implementing advanced overload protection, zero crossing relay switching synchronization, Off-Hook detection, multiple ringing frequency selection and output amplitude adjustment. The power train, designed to be used with the PD5036, is an isolated, open loop flyback topology. The PD5036 generates a PWM signal, which drives a FET transistor that switches the primary of a flyback transformer. This produces a rectified half sine wave on the secondary side of the transformer. An additional control signal synchronizes a 4-output transistor bridge, which converts the rectified half sine wave to full sine wave. In order to maintain the ring generator’s input to output isolation, the synchronization signals control the bridge via an opto coupler pair. The controller also includes overload protection, A/D function for measuring the input voltage, and a report signal for indicating over current. The PD5036 is a cost-effective solution for applications using more than 10,000 units. For quantities less than 10,000 units, the most economical solution is a modular sine wave ring generator (PCR-SIN01A Series, PCR-SIN03B Series, or the PCR-SIN06 Series).
|
299.53 kB | 11/30/-1 | 11/04/2014 | |
PD-5524G Datasheet | 807.42 kB | 04/17/2013 | 11/04/2014 | |
PD63000ACG-0603 Datasheet
PD63000ACG-0603 is a 96-port, mixed-signal, Power over Ethernet microcontroller unit. Used with the PD64012G, PD64012GH, PD64004A and PD64004AH PSE Manager ICs, it allows the detection of IEEE 802.3af-2003 and pre-standard devices, ensuring safe power feeding and removal over Ethernet ports. It also supports pre-standard IEEE802.3at devices consuming up to 50W. With full digital control via a serial communication interface and a minimum of external components, the MCU integrates in multi-port and highly populated Ethernet switches. The PD63000ACG-0603 has two possible working configurations: a low-cost implementation, supporting up to 571mA and a fully IEEE802.3at-ready configuration.
|
49.99 kB | 11/30/-1 | 11/04/2014 | |
PD64001 Datasheet
The PD64001 is a single-port Power over Ethernet PSE (Power Source Equipment) Manager. The PSE Manager allows for the detection of IEEE 802.3af-2003 and IEEE802.3at powered devices, ensuring safe power feeding and monitoring of Ethernet ports. With a minimum of external components, the PD64001 integrates in a one-port or two- port PoE-port switches and Midspans. The PD64001 has several operating modes, allowing it to be tailored to the customer application, be it a Switch or a Midspan, IEEE802.af or IEEE802.3at-compliant, with 1-event or 2-events classification, AC or DC disconnect and strict resistor detection or legacy detection capabilities. With a fully IEEE802.3at-compliant version and and additional 36W capable version (PD64001H) the PD64001 allows build extremely flexible 1-port PSEs.
|
378.85 kB | 11/30/-1 | 11/04/2014 | |
PD64004A Datasheet
PD64004A is a four-port, mixed-signal, high-voltage Power over Ethernet PSE Manager. The IC allows the detection of IEEE 802.3af-2003 powered devices, ensuring safe power feeding and removal over Ethernet ports. With full digital control via a serial communication interface and a minimum of external components, the IC integrates in multi-port and highly populated Ethernet switches. The PD64004A has three possible working configurations: an Automatic stand-alone mode, for basic PoE functions, the PoE+ Mode supporting legacy devices and autonomous operation with the PD33000G MCU and an Enhanced mode, for extended functions and added flexibility with the PD63000G and PD83000G MCU’s.
|
55.44 kB | 11/30/-1 | 11/04/2014 | |
PD64004AH Datasheet
Microsemi’s™ PD64004AH is a 4-port, mixed-signal, high-voltage Power over Ethernet (PoE) Manager designed to support IEEE 802.3af-2003 and 802.3at-2009 PoE applications.
|
746.04 kB | 11/30/-1 | 11/04/2014 | |
PD64012G Datasheet
PD64012G is a twelve-port, mixed-signal, high-voltage Power over Ethernet PSE Manager. The IC allows the detection of IEEE 802.3af-2003 powered devices, ensuring safe power feeding and removal over Ethernet ports. With full digital control via a serial communication interface and a minimum of external components, the IC integrates in multi-port and highly populated Ethernet switches. The PD64012G has two possible working configurations: an Automatic stand-alone mode, for basic PoE functions,and an Enhanced mode, for extended functions and added flexibility with the presence of the PD63000G and PD83000G MCU’s.
|
55.28 kB | 11/30/-1 | 11/04/2014 | |
PD64012GH Datasheet
PD64012GH is a twelve-port, mixed-signal, high-voltage High Power over Ethernet PSE Manager. The IC allows the detection of IEEE 802.3af-2003 powered devices, ensuring safe power feeding and removal over Ethernet ports. It also supports pre-standard IEEE802.3at devices consuming up to 59.5W. With full digital control via a serial communication interface and a minimum of external components, the IC integrates in multi-port and highly populated Ethernet switches. The PD64012GH has two possible working configurations: a low-cost implementation, supporting up to 571mA and a fully IEEE802.3at-ready one. Both maintain the PD64012G Enhanced mode features, for extended functions and added flexibility with the presence of the PD63000G MCU.
|
55.39 kB | 11/30/-1 | 11/04/2014 | |
PD69000 Datasheet
PD69000 is a ninety-six-port, mixed-signal, Power over Ethernet Microcontroller Unit. Used with the PD69012 and PD69008, it allows the detection of IEEE 802.3af-2003, IEEE802.3at-draft3.2 and pre-standard devices, ensuring safe power feeding and removal over Ethernet ports. It also supports 4-pairs IEEE802.3at devices consuming up to 59W. With full digital control via a serial communication interface and a minimum of external components, the MCU integrates in multi-port and highly populated Ethernet switches.
|
103.89 kB | 11/30/-1 | 11/04/2014 | |
PD69008 Datasheet
PD69008 is a eight-port, mixed-signal, high-voltage High Power over Ethernet PSE Manager. The IC allows the detection of IEEE802.3af-2003 and IEEE802.3at-draft2.0 powered devices, ensuring safe power feeding and removal over Ethernet ports. With full digital control via a serial communication interface and a minimum of external components, the IC integrates in multi-port and highly populated Ethernet switches.
|
119.6 kB | 11/30/-1 | 11/04/2014 | |
PD69008 Abridged Datasheet
PD69008 device is an 8-port, mixed-signal, high voltage Power over Ethernet driver. It enables detection of IEEE802.3af-2003 compliant PDs (Powered Devices) and IEEE802.3AT High Power Devices, thus, ensuring safe power feeding and disconnection of ports. With full digital control via a serial communication interface and a minimum of external components, the device integrates into multiport and highly populated Ethernet switches and routers.
|
459.79 kB | 11/30/-1 | 11/04/2014 | |
PD69012 Abridged Datasheet
PD69012 device is a 12-port, mixed-signal, high voltage Power over Ethernet driver. It enables detection of IEEE802.3af-2003 compliant PDs (Powered Devices) and IEEE802.3AT High Power Devices, thus, ensuring safe power feeding and disconnection of ports. With full digital control via a serial communication interface and a minimum of external components, the device integrates into multiport and highly populated Ethernet switches and routers.
|
426.01 kB | 11/30/-1 | 11/04/2014 | |
PD69100 Datasheet | 205.17 kB | 03/07/2013 | 11/04/2014 | |
PD-9001G-40/SP Datasheet | 587.25 kB | 03/20/2013 | 11/04/2014 | |
PD-9001GO/AC Datasheet | 909.49 kB | 03/20/2013 | 11/04/2014 | |
PD-9001GO/12-24VDC Datasheet | 940.67 kB | 06/12/2013 | 11/04/2014 | |
PD-9001GO/LL/AC Datasheet | 914.79 kB | 06/24/2014 | 11/04/2014 |