Datasheets
Documents
Document Name | Size | Published | Modified | |
---|---|---|---|---|
SD75A Datasheet
The HSMBJLCR60 low capacitance rectifier is used in parallel applications with a low-capacitance transient voltage suppressor (TVS) such as the HSMBJSAC5.0-50 series for unidirectional applications as shown in Figure 4. It is rated for 44 Amp forward surges to compliment this 500 Watt TVS series and also provide a low capacitance and a low forward (VF) voltage with fast response time. The low capacitance rating of 30 pF when used in parallel to the HSMBJSAC series will result in a total capacitance of 60 pF or less at zero volts for protecting higher frequency applications from inductive switching threats or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. With their fast response time, they also provide ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4 respectively.
|
84.48 kB | 11/30/-1 | 11/30/-1 | |
sd76a Datasheet
Microsemi’s 65 kW bidirectional Transient Voltage Suppressors (TVSs) protects 28 volt dc airborne electronic equipment from harsh lightning environments per RTCA/DO-160E Section 22 and is compatible with Section 16, paragraph 16.6.2.4 Category A for 46.3 V, Category B for 60 V, and Category Z for 80 V high-line surges. It is also optionally available with screening in accordance with MIL-PRF-19500 or avionics screening as described in the Features section. It is also available as RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part number. Microsemi also offers a broad spectrum of other TVSs to meet your needs.
|
112.79 kB | 11/30/-1 | 11/30/-1 | |
SD77A Datasheet
Microsemi’s RT130KP275 and RT130KP295 bidirectional 130 kW Transient Voltage Suppressors (TVSs) protects 120 volt ac airborne electronic equipment from harsh lightning per RTCA/DO-160E Section 22 and is compatible with Section 16 for 180 volt ac 100 ms highline surges (paragraph 16.5.2.3.1b). Microsemi also offers a broad spectrum of other TVS products to meet your needs.
|
113.77 kB | 11/30/-1 | 11/30/-1 | |
SD79A Datasheet
The LCR60 low capacitance rectifier is used in parallel applications with a low-capacitance transient voltage suppressor (TVS) such as the SAC5.0-50 series for unidirectional applications as shown in Figure 4. It is rated for 44 Amp forward surges to compliment this 500 Watt TVS series and also provide a low capacitance and a low forward (VF) voltage with fast response time. The low capacitance rating of 30 pF when used in parallel to the SAC series will result in a total capacitance of 60 pF or less at zero volts for protecting higher frequency applications from inductive switching threats or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. With their fast response time, they also provide ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4 respectively.
|
89.43 kB | 11/30/-1 | 11/30/-1 | |
SD7A Datasheet
The 1EZ110D5 thru 1EZ200D5 series of axial-leaded 1.0 watt Zeners provides voltage regulation selections with 5% tolerances from 110 to 200 volts in a DO-41 plastic package size. Other Zener voltage tolerances are also available by changing the suffix number to the tolerance desired such as 1 and 2 for tighter tolerances or 10 for wider tolerance. These plastic encapsulated Zeners have moisture classification of Level 1 with no dry pack required and are also available in various military equivalent screening levels by adding a prefix identifier as also described in the Features section. They may be operated at high maximum dc currents or full power rating with adequate heat sinking. Microsemi also offers numerous other Zener products to meet higher and lower power applications.
|
162.53 kB | 11/30/-1 | 11/30/-1 | |
SD80A Datasheet
The ELCR80 low capacitance rectifier is used in parallel with a low-capacitance transient voltage suppressor (TVS) such as the LCE6.5-170A series for unidirectional applications as shown in Figure 4. It is rated for 100 Amp forward surges to compliment this 1500 Watt TVS series and also provide a low capacitance and a low forward (VF) voltage with fast response time. The low capacitance rating of 100 pF when used in parallel to the LCE6.5-170A series will result in a total capacitance of 200 pF or less at zero volts for protecting higher frequency applications from inductive switching threats or electrical systems involving secondary lightning effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for airborne avionics. With their fast response time, they also provide ESD and EFT protection per IEC61000-4-2 and IEC61000-4-4 respectively.
|
91.83 kB | 11/30/-1 | 11/30/-1 | |
SD81A Datasheet
The SM16Z4689 is designed for supplying the 5 volt bias at 50 ?A for hex attenuator driver components. These provide the controlling voltage for 6-bit digital GaAs attenuators such as the Hittite HMC424LP3. This low current, 50 ?A 5.1V zener array provides the necessary bias for the High State, 4.2 – 5.0 V, conditions when it triggers the associated driver. The HEX-RegTM voltage regulator array is supplied in the SO-16 package with two spare diodes for applications requiring up to eight diodes. A suggested driver circuit in figure 1 illustrates one of the six inputs to a 6-bit attenuator.
|
147.21 kB | 11/30/-1 | 11/30/-1 | |
SD84A Datasheet
Microsemi’s 100 kW Transient Voltage Suppressors (TVSs) are designed for aircraft applications requiring high power transient protection with a comparatively small axial-leaded package size. This includes various threats such as “Waveform 4” at 6.4/69 µs per RTCA/DO-160E Section 22. It is also available with screening in accordance with MIL-PRF-19500 or avionics screening as described in the Features section herein. It may also be optionally acquired with RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part number. Microsemi also offers a broad spectrum of other TVSs to meet your needs.
|
134.03 kB | 11/30/-1 | 11/30/-1 | |
SD85A Datasheet
This “Ultrafast Recovery” rectifier diode series is military qualified to MIL-PRF-19500/742 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 6.0 Amp rated rectifiers for working peak reverse voltages from 50 to 150 volts are hermetically sealed with voidless-glass construction using an internal “Category III” metallurgical bond. These devices are also available in surface mount MELF package configurations by adding a “US” suffix (see separate data sheet for 1N5807CBUS thru 1N5811CBUS). Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including standard, fast and ultrafast device types in both through-hole and surface mount packages.
|
209.1 kB | 11/30/-1 | 11/30/-1 | |
SD86A Datasheet
This “Ultrafast Recovery” surface mount rectifier diode series is military qualified to MIL-PRF-19500/742 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 6.0 Amp rated rectifiers for working peak reverse voltages from 50 to 150 volts are hermetically sealed with voidless-glass construction using an internal “Category III” metallurgical bond. These devices are also available in axial-leaded package configurations (see separate data sheet for 1N5807CB thru 1N5811CB). Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including standard, fast, and ultrafast device types in both through-hole and surface mount packages.
|
159.86 kB | 11/30/-1 | 11/30/-1 | |
SD87A Datasheet
This “standard recovery” rectifier diode is military qualified to MIL-PRF-19500/587 and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 500 mA rated rectifiers for working peak reverse voltages from 225 to 600 volts are hermetically sealed with void-less-glass construction using an internal “Category I” metallurgical bond. The surface mount MELF package configurations are also available by adding a “US” suffix (see separate data sheet for 1N6661US thru 1N6663US). Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including fast and ultrafast device types in both through-hole and surface mount packages.
|
122.23 kB | 11/30/-1 | 11/30/-1 | |
SD88A Datasheet
These “standard recovery” rectifier diodes are military qualified to MIL-PRF-19500/587 and is ideal for high-reliability applications where a failure cannot be tolerated. They have a 500 mA rating with working peak reverse voltages from 225 to 600 volts and are hermetically sealed with void-less-glass construction using an internal “Category I” metallurgical bond. The axial-leaded package configurations are also available by deleting the “US” suffix (see separate data sheet for 1N6661 to 1N6663). Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including Fast and Ultrafast device types in both through-hole and surface mount packages.
|
127 kB | 11/30/-1 | 11/30/-1 | |
SD89A Datasheet This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of lightning strikes, providing circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is virtually instantaneous. It also provides protection from transients caused by inductive load dumps, induced RFI, and ESD, providing protection to IEC61000-4-2 and -4-4. |
477.16 kB | 11/30/-1 | 07/27/2013 | |
SD8A Datasheet
The 2EZ3.6D5 thru 2EZ200D5 series of axial-leaded 2.0 watt Zeners provides voltage regulation selections with 5% tolerances from 3.6 to 200 volts in a DO-41 plastic package size. Other Zener voltage tolerances are also available by changing the suffix number to the tolerance desired such as 1 and 2 for tighter tolerances or 10 for wider tolerance. These plastic encapsulated Zeners are also available in various military equivalent screening levels by adding a prefix identifier as also described in the Features section. They may be operated at high maximum dc currents or full power rating with adequate heat. Microsemi also offers numerous other Zener products to meet higher and lower power applications.
|
157.57 kB | 11/30/-1 | 11/30/-1 | |
SD9A Datasheet The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These are also available with an internal-metallurgical-bond option by adding a The 1N4099UR thru 1N4135UR and 1N4614UR thru 1N4627UR series of 0.5 watt glass surface mount DO-213AA Zener voltage regulators provides a selection from 1.8 to 100 volts in standard 5% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These are also available with an internal-metallurgical-bond option by adding a “-1” suffix (see separate data sheet) including JAN, JANTX, and JANTXV military qualifications. Microsemi also offers numerous other Zener products to meet higher and lower power applications. |
129.62 kB | 11/30/-1 | 09/14/2012 | |
SDB207 Datasheet | 168.1 kB | 05/03/2013 | 05/03/2013 | |
SG109 Datasheet | 1.56 MB | 11/30/-1 | 11/30/-1 | |
SG117A Datasheet
Key Features:
• 1% output voltage tolerance
• 0.01%/V line regulation
• 0.3% load regulation
• Min. 1.5A output current
• Available in hermetic TO-220
The SG117A Series are 3-terminal positive adjustable voltage regulators which offer improved performance over the original 117 design. A major feature of the SG117A is reference voltage tolerance guaranteed within ± 1%, allowing an overall power supply tolerance to be better than 3% using inexpensive 1% resistors. Line and load regulation performance has been improved as well. Additionally, the SG117A reference voltage is guaranteed not to exceed 2% when operating over the full load, line and power dissipation conditions. The SG117A adjustable regulators offer an improved solution for all positive voltage regulator requirements with load currents up to 1.5A.
|
611.3 kB | 11/30/-1 | 11/30/-1 | |
SG117AHV SG117HV Datasheet | 449.76 kB | 07/23/2013 | 07/23/2013 | |
SG117HV SG117AHV Datasheet | 449.76 kB | 07/17/2013 | 07/17/2013 |