PM3393 S/UNI 1x10GE XP
Overview
- Implements 10 Gigabit LAN PHY according the IEEE 802.3ae standard.
- Provides direct connection to XENPAK optical modules via a 4-bit by 3.125 Gbit/s IEEE 802.3ae XAUI line-side interface.
- Provides SATURN® POS-PHY™ Level 4 16-bit LVDS System-side Interface (clocked at 700 MHz nominal).
- Provides an auxillary XAUI interface to protect against optical failure.
- Provides extract and insert ports for ethernet preamble bytes to support ethernet-based OAM protocols and carry user-defined information.
- Provides standard IEEE 802.3ae 10 Gigabit Ethernet Media Access Controller (10GMAC) for frame verification.
- Implements IEEE 802.3ae 10GBase-X Physical Coding Sub-layer (PCS).
- Provides internal FIFOs (64 Kbyte ingress and 16 Kbyte egress) to accommodate system latencies and provide loss-less flow control for up to 2 Km for regular size frames.
- Provides line-side and system-side loopbacks for system level diagnostic capability.
- Provides a generic 16-bit microprocessor bus interface for configuration, control, and status monitoring.
- Standard 5 signal P1149.1 JTAG test port.
- Low power 1.8 V CMOS core logic with 3.3 V CMOS/TTL compatible digital inputs and digital outputs.
- Industrial temperature range (-40 °C to +85 °C).
Applications
- Edge and Core Routers.
- Multi-Service (Multi-Protocol) Switches.
- Internet POP and Transport POP L2 Ethernet Switches.
- Data cards for Multi-service Provisioning Platforms
- Optical cross-connects.
- 10 Gigabit Ethernet Enterprise Switches with XENPAK uplinks.
- 10 Gigabit Ethernet test equipment.