1N5913BUR-1 (#71505) |
Product Status
In Production |
Overview
This surface mountable 1.5 W Zener diode series in the JEDEC DO-213AB package is similar in electrical features to the JEDEC registered 1N5913B thru 1N5956B axial-leaded package for 3.3 to 200 V. It is an ideal selection for applications of high density and low parasitic requirements. Due to its glass hermetic qualities and metallurgically enhanced internal contacts, it may also be used for high reliability applications when required by a source control drawing (SCD) or screening in accordance with MIL-PRF-19500 as described in Features below. Zener voltage tolerance options are identified by part number suffix including tight-tolerance. A variety of other Zener product offerings and packages are available by Microsemi to meet higher or lower power and test current applications. |
Package Carrier: | ESD Bag |
Electrical Rating | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Dynamic Impedance | Zx | 10 | Ω | ||
Regulator Current, DC Maximum Rated | IZM | 454 | mA | ||
Regulator voltage, reference voltage (dc) | VZ | 3.3 | V | ||
Reverse Current (µA) | IR | 100 | µA |
Maximum Electrical Rating | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Power Dissipation | PD | 1.5 | W |
Alphanumeric Parameter | Value |
---|---|
Quality Level | - |
Resources
Datasheets | |
---|---|
SA3-35 Datasheet |
This part can be found in the following product categories: